參數資料
型號： M37754M8C-XXXHP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP100
封裝： 0.50 MM PITCH, FINE PITCH, PLASTIC, QFP-100
文件頁數： 29/114頁
文件大小： 1116K
代理商： M37754M8C-XXXHP
21
MITSUBISHI MICROCOMPUTERS
M37754M8C-XXXGP, M37754M8C-XXXHP
M37754S4CGP, M37754S4CHP
PRELIMINAR
Y
Notice:
This
is not
a final
specification.
Some
parametric
limits
are
subject
to change.
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Fig. 14 Processor mode register 0 bit configuration
Notes 1: Bits 2, 3, and 4 can be re-write after bit 5 (expansion function select bit) is set to “1.”
2: After bit 5 is set to “1” once, bit 5 cannot be cleared to “0” except external reset and software reset.
3: Bits 6 and 7 are write-only bits and undefined at read. Do not use SEB or CLB insturuction when setting bits 0–7.
Transmit clock output pin select bit
00 : Normal mode (output only to CLK0)
01 : Plural clocks specified; output to CLK0
10 : Plural clocks specified; output to CLKS0
11 : Plural clocks specified; output to CLKS1
Internal clock stop select bit at WIT (Note 1)
0 : Clock for peripheral function and watchdog timer are operating at WIT
1 : Internal clock except that for oscillation circuit and watchdog timer are stopped at WIT
76543210
Particular function select register 1 (6D16)
Watchdog timer’s clock select bit (Note 1)
0 : Exclusive clock deviding circuit output (Wf512, Wf32) is used as clock for watchdog
timer. Clock (Wf512, Wf32) for watchdog timer does not change in hold.
1 : Clock for peripheral device deviding circuit output (Pf512, Pf32) is used as clock for
watchdog timer. Clock (Pf512, Pf32) for watchdog timer changes in hold.
Watchdog timer exclusive clock dividing circuit is stopped.
Signal output stop select bit (Note 1)
Refer to Table 8.
Expansion function select bit (Note 2)
Refer to Figure 62.
Pull-up select bit 0 (Note 3)
0 : With no pull-up for P57, P56, P55, P54
1 : With pull-up for P57, P56, P55, P54
Pull-up select bit 1 (Note 3)
0 : With no pull-up for P95
1 : With pull-up for P95
TC1 TC0
Fig. 15 Processor mode register 0 bit configuration
Note: When selecting low-speed running, set bit 2 to “0.”
Processor mode bits
00 : Single-chip mode
01 : Memory expansion mode
10 : Microprocessor mode
11 : Do not select.
Internal memory access bus cycle select bit (Note)
Internal memory access condition in high-speed running
0 : 2-
φ access for internal RAM, 3-φ access for internal ROM and SFR
1 : 2-
φ access for internal RAM, internal ROM, SFR
Software reset bit
The microcomputer is reset when this bit is set to “1”.
Interrupt priority detection time select bit
0 0 : Select 0 in Figure 13
0 1 : Select 1 in Figure 13
1 0 : Select 2 in Figure 13
Test mode bit
This bit must be “0.”
Clock
φ1 output select bit
0 : No
φ1 output
1 :
φ1 output
76543210
0
Processor mode register 0 (5E16)
相關PDF資料
PDF描述
M37754S4CHP 16-BIT, 40 MHz, MICROCONTROLLER, PQFP100
M37754S4CHP 16-BIT, 40 MHz, MICROCONTROLLER, PQFP100
M37754M8C-XXXGP 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP100
M37777E9AGS 16-BIT, UVPROM, 16 MHz, MICROCONTROLLER, CQCC100
M34550M6A-XXXFP 4-BIT, MROM, 1.6 MHz, MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
M37754S4CGP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16BIT CMOS MICROCOMPUTER
M37754S4CHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M3775PR-H400CL 制造商:Bonitron 功能描述:OVERVOLTAGE BRAKING RESISTOR
M3775RK-0.75A 制造商:Bonitron 功能描述:OVERVOLTAGE BRAKING RESISTOR
M3775RK-C0.50A 制造商:Bonitron 功能描述:OVERVOLTAGE BRAKING RESISTOR
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*