參數資料
型號： M37905M8C-XXXSP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PDIP64
封裝： 0.750 INCH, 1.78 MM PITCH, PLASTIC, SDIP-64
文件頁數： 91/105頁
文件大小： 1040K
代理商： M37905M8C-XXXSP
83
M37905M4C-XXXFP, M37905M4C-XXXSP
M37905M6C-XXXFP, M37905M6C-XXXSP
M37905M8C-XXXFP, M37905M8C-XXXSP
PRELIMINAR
Y
Notice:
This
is not
a final
specification.
Some
param
etric
lim
its are
subject
to change.
16-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
Fig. 95 Bit configuration of particular function select register 0
Fig. 94 Bit configuration of clock control register 0
7
6
543
2
1
0
Particular function select register 0
External clock input select bit (Note)
0: Oscillation circuit is active. (The oscillator is connected.)
Watchdog timer is used at stop mode termination.
1: Oscillation circuit is inactive. (The externally-generated clock is input.)
When the system clock select bit = “0”,
watchdog timer is not used at stop mode termination.
When the system clock select bit = “1”,
watchdog timer is used at stop mode termination.
Fix this bit to “0”.
STP instruction invalidity select bit (Note)
0: STP instruction is valid.
1: STP instruction is invalid.
Note:
Address
6216
00
0
Writing to these bits requires the following procedure:
Write “5516” to this register. (The bit status does not change only by this writing.)
Succeedingly, write “0” or “1” to each bit.
Also, use the MOVM (MOVMB) instruction or STA (STAB, STAD) instruction
7
6
543
2
1
0
Clock control register 0
Fix this bit to “1”.
PLL circuit operation enable bit (Note 1)
0: PLL frequency multiplier is inactive, and pin VCONT is invalid (floating state).
1: PLL frequency multiplier is active, and pin VCONT is valid.
PLL multiplication ratio select bits (Note 2)
00: Do not select.
01: Double
10: Triple
11: Quadruple
Fix this bit to “1”.
System clock select bit (Note 3)
0: fXIN
1: fPLL
Peripheral device’s clock select bits 1, 0
See Table 10.
Address
BC16
1
Notes 1: When not using the PLL frequency multiplier, be sure to clear this bit to “0”.
In the stop mode, the PLL circuit is inactive regardless of this bit’s content; at this time, pin
VCONT is invalid.
2: When rewriting this bit, be sure to clear bit 5 to “0” simultaneously. Also, after this bit is
rewritten, insert a waiting time of 2 ms, and then set bit 5 to “1”.
3: When the PLL circuit operation enable bit (bit 1) has been cleared to “0”, this bit will also be
cleared to “0”. When bit 1 = “0”, nothing can be written to this bit. (Fixed to be “0”.)
相關PDF資料
PDF描述
M37905M4C-XXXSP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PDIP64
M37905M4C-XXXFP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP64
M37905M8C-XXXFP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP64
M37905M6C-XXXSP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PDIP64
M37905M8C-XXXSP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PDIP64
相關代理商/技術參數
參數描述
M37905T-PRB 功能描述:DEV POD PROBE FOR M37900T2-RPD-E RoHS:否 類別:編程器，開發系統 >> 配件 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 標準包裝:1 系列:- 附件類型:USB 至 1-Wire? RJ11 適配器 適用于相關產品:1-Wire? 設備 產品目錄頁面:1429 (CN2011-ZH PDF)
M37906F8CFP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:16-BIT CMOS MICROCOMPUTER
M37906F8CFP-T4 制造商:Renesas Electronics Corporation 功能描述:FLSH 16-BIT
M37906F8CSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
M37906M4C-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*