參數資料
型號: M3826AMFA-XXXGP
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP100
封裝: PLASTIC, LQFP-100
文件頁數: 54/93頁
文件大?。?/td> 996K
代理商: M3826AMFA-XXXGP
Rev.2.00
May. 24, 2006
page 58 of 90
REJ03B0028-0200
3826 Group (A version)
NOTES ON USE
Countermeasures Against Noise
(1) Shortest wiring length
Wiring for RESET pin
Make the length of wiring which is connected to the RESET pin
as short as possible. Especially, connect a capacitor across the
RESET pin and the VSS pin with the shortest possible wiring
(within 20 mm).
● Reason
The width of a pulse input into the RESET pin is determined by
the timing necessary conditions. If noise having a shorter pulse
width than the standard is input to the RESET pin, the reset is
released before the internal state of the microcomputer is com-
pletely initialized. This may cause a program runaway.
Fig. 64 Wiring for clock I/O pins
(2) Connection of bypass capacitor across VSS line and VCC line
In order to stabilize the system operation and avoid the latch-up,
connect an approximately 0.1
F bypass capacitor across the VSS
line and the VCC line as follows:
Connect a bypass capacitor across the VSS pin and the VCC pin
at equal length.
Connect a bypass capacitor across the VSS pin and the VCC pin
with the shortest possible wiring.
Use lines with a larger diameter than other signal lines for VSS
line and VCC line.
Connect the power source wiring via a bypass capacitor to the
VSS pin and the VCC pin.
Fig. 63 Wiring for the RESET pin
Wiring for clock input/output pins
Make the length of wiring which is connected to clock I/O pins
as short as possible.
Make the length of wiring (within 20 mm) across the grounding
lead of a capacitor which is connected to an oscillator and the
VSS pin of a microcomputer as short as possible.
Separate the VSS pattern only for oscillation from other VSS
patterns.
● Reason
If noise enters clock I/O pins, clock waveforms may be de-
formed. This may cause a program failure or program runaway.
Also, if a potential difference is caused by the noise between
the VSS level of a microcomputer and the VSS level of an oscil-
lator, the correct clock will not be input in the microcomputer.
Fig. 65 Bypass capacitor across the VSS line and the VCC line
RESET
Reset
circuit
Noise
VSS
Reset
circuit
VSS
RESET
VSS
N.G.
O.K.
Noise
XIN
XOUT
VSS
XIN
XOUT
VSS
N.G.
O.K.
VSS
VCC
VSS
VCC
N.G.
O.K.
相關PDF資料
PDF描述
M3826AMFA-XXXGP 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP100
M38268MCA-XXXGP 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP100
M3826AMFA-XXXFP 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP100
M3826AMFLXXXGP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP100
M38268MCLXXXFP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
M3826-BK001 制造商:Alpha Wire 功能描述:
M3826-BK002 制造商:Alpha Wire 功能描述:
M3826-BK005 制造商:Alpha Wire 功能描述:
M3826-BK199 制造商:Alpha Wire 功能描述:
M3826-BLACK-100 制造商:Alpha Wire 功能描述: