參數資料
型號: MBM29DL162BD-70PFTN
廠商: FUJITSU LTD
元件分類: PROM
英文描述: 1M X 16 FLASH 3V PROM, 70 ns, PDSO48
封裝: PLASTIC, TSOP1-48
文件頁數: 2/74頁
文件大?。?/td> 1170K
代理商: MBM29DL162BD-70PFTN
MBM29DL16XTD/BD-70/90
10
*4 : The valid addresses are A6 to A0.
*5 : This command is valid during HiddenROM mode.
*6 : The data “00h” is also acceptable.
*7 : The fourth bus cycle is only for read.
Notes:
Address bits A19 to A11 = X = “H” or “L” for all address commands except or Program Address (PA), Sector
Address (SA), and Bank Address (BA).
Bus operations are defined in “MBM29DL16XTD/BD User Bus Operations Tables (BYTE = VIH and BYTE = VIL)”.
RA =
Address of the memory location to be read
IA =
Autoselect read address that sets both the bank address specified at (A19, A18, A17, A16, A15) and
all the other A6, A1, A0, (A-1) .
PA =
Address of the memory location to be programmed
Addresses are latched on the falling edge of the write pulse.
SA =
Address of the sector to be erased. The combination of A19, A18, A17, A16, A15, A14, A13, and A12 will
uniquely select any sector.
BA =
Bank Address (A15 to A19)
RD = Data read from location RA during read operation.
ID =
Device code/manufacture code for the address located by IA.
PD =
Data to be programmed at location PA. Data is latched on the rising edge of write pulse.
SPA = Sector group address to be protected. Set sector group address (SGA) and (A6, A1, A0) = (0, 1, 0).
SD =
Sector group protection verify data. Output 01h at protected sector group addresses and output
00h at unprotected sector group addresses.
HRA = Address of the HiddenROM area
29DL16XTD (Top Boot Type)
Word Mode: 0F8000h to 0FFFFFh
Byte Mode: 1F0000h to 1FFFFFh
29DL16XBD (Bottom Boot Type) Word Mode: 000000h to 007FFFh
Byte Mode: 000000h to 00FFFFh
HRBA =Bank Address of the HiddenROM area
29DL16XTD (Top Boot Type)
:A19 = A18 = A17 = A16 = A15 = VIH
29DL16XBD (Bottom Boot Type) :A19 = A18 = A17 = A16 = A15 = VIL
The system should generate the following address patterns:
Word Mode: 555h or 2AAh to addresses A10 to A0
Byte Mode: AAAh or 555h to addresses A10 to A0 and A–1
Both Read/Reset commands are functionally equivalent, resetting the device to the read mode.
Command combinations not described in “MBM29DL16XTD/BD Command Definitions Table” are illegal.
相關PDF資料
PDF描述
MBM29LV008B-10PFTR 1M X 8 FLASH 3V PROM, 100 ns, PDSO40
MBR16100CT 16 A, 100 V, SILICON, RECTIFIER DIODE, TO-220AB
MBR20100WT 10 A, SILICON, RECTIFIER DIODE, TO-247AD
MBR30100PTP 30 A, 100 V, SILICON, RECTIFIER DIODE, TO-247
MBR3020WT-G 30 A, SILICON, RECTIFIER DIODE, TO-247AD
相關代理商/技術參數
參數描述
MBM29DL162BD-70PFTR 制造商:SPANSION 制造商全稱:SPANSION 功能描述:FLASH MEMORY CMOS 16M (2M X 8/1M X 16) BIT Dual Operation
MBM29DL162BD-90PBT 制造商:SPANSION 制造商全稱:SPANSION 功能描述:FLASH MEMORY CMOS 16M (2M X 8/1M X 16) BIT Dual Operation
MBM29DL162BD-90PFTN 制造商:SPANSION 制造商全稱:SPANSION 功能描述:FLASH MEMORY CMOS 16M (2M X 8/1M X 16) BIT Dual Operation
MBM29DL162BD-90PFTR 制造商:SPANSION 制造商全稱:SPANSION 功能描述:FLASH MEMORY CMOS 16M (2M X 8/1M X 16) BIT Dual Operation
MBM29DL162BE 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16M (2M X 8/1M X 16) BIT Dual Operation