參數資料
型號： ML9092-04
廠商： OKI SEMICONDUCTOR CO., LTD.
英文描述： LCD Driver with Key Scanner and RAM
中文描述： 液晶顯示驅動器，掃描器和RAM的關鍵
文件頁數： 45/66頁
文件大?。?/td> 659K
代理商： ML9092-04
FEDL9092-01
OKI Semiconductor
ML9092-01/02/03/04
45/66
Duty
Y register setting range
and loop range
0 to 7 (00H to 07H)
0 to 8 (00H to 08H)
0 to 9 (00H to 09H)
Invalid address setting range
1/8
1/9
1/10
0 to 7 (00H to 07H)
0 to 8 (00H to 08H)
0 to 9 (00H to 09H)
This register is reset to “0” when the
RESET
pin is made low.
Port register A (PTA) set
D7
D6
D5
D4
—
D3
D2
D1
D0
PTA
—: don’t care
The port register A set instruction sets the output of port A.
When the PTA bit is set to “1”, a “H” level is output from the PA0 pin of general purpose port A. In the same way,
when the PTA bit is set to “0”, a “L” level is output from the PA0 pin. If the
RESET
pin is pulled to a “L” level, the
PE bit (bit D2) of the control register is reset to “0”, this register is reset to “0”, and the PA0 pin goes to high
impedance.
After the reset state is released, if the PTA bit of this register is set to “1” or “0” and then the PE bit is set to “1”, the
PA0 pin is released from its high impedance state and a “H” or “L” level that corresponds to the set status of the
PTA bit, is output from the PA0 pin.
Port register B (PTB) set
D7
D6
D5
D4
—
—: don’t care
The port register B set instruction sets the output of port B. (Applies to the ML9092-01/04.)
When each bit of PTB0 to PTB2 is set to “1”, the PWM signal set in the PWM0 to PWM2 registers is output from
each of the PB0 to PB2 pins of the general purpose port B. In the same way, when each bit of PTB0 to PTB2 is set
to “0”, each of the PB0 to PB2 pins are pulled to a “L” level. If the
RESET
pin is pulled to a “L” level, the PE bit
(bit D2) of the control register is reset to “0”, this register is reset to “0”, and the PB0 to PB2 pins go to high
impedance.
After the reset state is released, if the a PWM value is set in the PWM0 to PWM2 registers and then the PE bit is set
to “1”, the PB0 to PB2 registers are released from their high impedance state and a PWM waveform is output.
D3
D2
PTB2
D1
PTB1
D0
PTB0
相關PDF資料
PDF描述
ML9203 5 x 7 Dot Character x 16-Digit x 2-Line Display Controller/Driver with Character RAM
ML9203-xx 5 x 7 Dot Character x 16-Digit x 2-Line Display Controller/Driver with Character RAM
ML9204 5 X 7 Dot Character ?24-Digit ?2-Line Display Controller/Driver with Character RAM (Built-in Key Scan)
ML9204-xx 5 X 7 Dot Character ?24-Digit ?2-Line Display Controller/Driver with Character RAM (Built-in Key Scan)
ML9205-01 5 x 7 Dot Character x 16-Digit Display Controller/Driver with Character RAM
相關代理商/技術參數
參數描述
ML9092-04TB 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:LCD Driver with Key Scanner and RAM
ML9093F 制造商:Ohmite Mfg Co 功能描述:
ML912 制造商:AEMC Instruments 功能描述:DATA LOGGER, 100A-1000AAC, 2CH, Input Voltage:- , RoHS Compliant: NA
ML914 制造商:AEMC Instruments 功能描述:DATA LOGGER, 100A-1000AAC, 4CH; Input Voltage:- ;RoHS Compliant: NA
ML9203 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:5 x 7 Dot Character x 16-Digit x 2-Line Display Controller/Driver with Character RAM
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*