1–29
Motorola Sensor Device Data
For More Information On This Product,
Go to: www.freescale.com
REFERENCE
(1)
Theresa Maudie, Testing Requirements and Reliability
Issues Encountered with Micromachined Structures,
Proceedings of the Second International Symposium
on Microstructures and Microfabricated Systems, Eds.
D. Denton, P.J. Hesketh and H. Hughes, ECS, vol.
95–27 (1995) pp. 223–230.
(2)
Arne Nakladal et al, Influences of Humidity and Mois-
ture on the Long–Term Stability of Piezoresistive Pres-
sure Sensors, Measurement, vol. 16 (1995) pp. 21–29.
(3)
Marin Nese and Anders Hanneborg, Anodic Bonding
of Silicon to Silicon Wafers Coated with Aluminum,
Silicon Oxide, Polysilicon or Silicon Nitride, Sensors
and Actuators A, vol. 37–38 (1993) pp. 61–67.
(4)
Janusz Bryzek, Micromachines on the March, IEEE
Spectrum, May 1994.
(5)
J. M. Hu, Physics–of–Failure–Based Reliability Qualifi-
cation of Automotive Electronics, Communications in
RMS, vol. 1, no. 2 (1994) pp. 21–33.
(6)
Michael Pecht et.al., Quality Conformance and Qualifi-
cation of Microelectronics Packages and Intercon-
nects,John Wiley & Sons, Inc., 1994.
(7)
William M. Alvino, Plastics for Electronics,McGraw–
Hill, 1995
(8)
Eugene R. Hnatek, Integrated Circuit Quality and Reli-
ability, Marcel Dekker, Inc., 1987.
(9)
Charles A. Harper, Handbook of Plastics, Elastomers,
and Composites,McGraw–Hill, 1992.
(10) Richard W. Hertzberg, Deformation and Fracture
Mechanics of Engineering Materials,John Wiley &
Sons, Inc., 1983.
(11) Joseph M. Giachino, Automotive Sensors: Driving
Toward Optimized Vehicle Performance, 7th Int’l Con-
ference on Solid State Sensor and Actuators, June
1993.
(12) Perry Poiss, What Additives do for Gasoline, Hydro-
carbon Processing, Feb. 1973.
(13) Gasoline/Methanol Mixtures for Material Testing, SAE
Cooperative Research Report CRP–001, Sep. 1990.
(14) Private communication to Andrew McNeil from City of
Phoenix, Water and Wastewater Department, Water
Quality Division, Jan. 1994.
(15) Laundry Detergents, Consumer Reports, Feb. 1991,
pp. 100–106.
(16) Silicon as a Mechanical Material, Kurt E. Petersen,
Proc. IEEE, vol. 70, no. 5, pp. 420–457, May 1982.
(17) Principles and Prevention of Corrosion, Denny A.
Jones, (Prentice Hall: Englewood Cliffs, NJ, 1992).
(18) Atlas of Electrochemical Equilibria in Aqueous Solu-
tions, M. Pourbaix, (Pergamon Press: Oxford, Eng-
land, 1966)
(19) Anisotropic Etching of Crystalline Silicon in Alkaline
Solutions, Part I. Orientation Dependence and Behav-
ior of Passivation Layers, H. Seidel et al, J. Electro-
chem. Soc., vol. 137, no. 11 (1990) pp. 3612–3625.
(20) Anisotropic Etching of Crystalline Silicon in Alkaline
Solutions, Part II. Influence of Dopants, H. Seidel et
al. J. Electrochem. Soc., vol. 137, no. 11 (1990)
pp. 3612–3625.
(21) Principles of Polymer Systems, 2nd ed., F. Rodriguez,
(Hemisphere Publishing Corporation: Washington,
D.C., 1982.
(22) D. J. Monk, Pressure Leakage through Material Inter-
faces in Pressure Sensor Packages, Sensors in Elec-
tronic Packaging, Eds. Charles Ume and Chao
Pin–Yeh, MED–Vol. 3/EEP–Vol.14 (1995) pp. 87–93.
(23) Paul A. Tobias and David C. Trindade, Applied Reli-
ability,Van Nostrand Reinhold, 1995.
(24) Wayne Nelson, Accelerated Testing,John Wiley &
Sons, Inc., 1990.
(25) O. Hallberg and D. S. Peck, “Recent Humidity Accel-
erations, A Base for Testing Standards,” Quality and
Reliability Engr. International, Vol. 7, pp 169–180,
1991.
F
Freescale Semiconductor, Inc.
n
.