
PDF: 09005aef80768abb/Source: 09005aef82a95a3a
Micron Technology, Inc., reserves the right to change products or specifications without notice.
DDR_x4x8x16_Core2.fm - 256Mb DDR: Rev. O, Core DDR: Rev. B 1/09 EN
73
2003 Micron Technology, Inc. All rights reserved.
256Mb: x4, x8, x16 DDR SDRAM
Operations
Data for any WRITE burst may be concatenated with or truncated with a subsequent
WRITE command. In either case, a continuous flow of input data can be maintained.
The new WRITE command can be issued on any positive edge of clock following the
previous WRITE command. The first data element from the new burst is applied after
either the last element of a completed burst or the last desired data element of a longer
burst which is being truncated. The new WRITE command should be issued x cycles
after the first WRITE command, where x equals the number of desired data element
pairs (pairs are required by the 2n-prefetch architecture).
Data for any WRITE burst may be followed by a subsequent READ command. To follow a
WRITE without truncating the WRITE burst, tWTR should be met, as shown in Figure 42 Data for any WRITE burst may be truncated by a subsequent READ command, as shown
Note that only the data-in pairs that are registered prior to the tWTR period are written
to the internal array, and any subsequent data-in should be masked with DM, as shown
Data for any WRITE burst may be followed by a subsequent PRECHARGE command. To
follow a WRITE without truncating the WRITE burst, tWR should be met, as shown in
Data for any WRITE burst may be truncated by a subsequent PRECHARGE command, as
tered prior to the tWR period are written to the internal array; any subsequent data-in
should be masked with DM, as shown in Figures
46 and
47. After the PRECHARGE
command, a subsequent command to the same bank cannot be issued until tRP is met.