參數資料
型號： RTL8100C-LF
廠商： Electronic Theatre Controls, Inc.
英文描述： SINGLE-CHIP FAST ETHERNET CONTROLLER WITH POWER MANAGEMENT
中文描述： 單芯片快速以太網控制器電源管理
文件頁數： 54/73頁
文件大?。?/td> 652K
代理商： RTL8100C-LF
RTL8100C & RTL8100CL
Datasheet
Single-Chip Fast Ethernet Controller
46
Track ID: JATR-1076-21 Rev. 1.06
2. 9346 D3c_support_PME = 0,
If Aux. power exists, then PMC in PCI config space is the same as 9346 PMC,
i.e. if 9346 PMC = C2 77, then PCI PMC = C2 77.
If Aux. power is absent, then PMC in PCI config space is the same as 9346 PMC except the above
4 bits are all 0’s, i.e. if 9346 PMC = C2 77, then PCI PMC = 02 76.
Note: In this case, if wakeup support is not desired when main power is off, it is suggested that the 9346
PMC be set to 02 76. It is not recommended to set the D0_support_PME bit to 1.
Link Wakeup
Link Wakeup occurs when the following conditions are met:
The LinkUp bit (CONFIG3#4) is set to 1, the PMEn bit (CONFIG1#0) is set to 1, and the RTL8100C(L)
is in isolation state, or the PME# can be asserted in the current power state.
The Link status is re-established.
Magic Packet Wakeup
A Magic Packet Wakeup occurs when the following conditions are met:
The destination address of the received Magic Packet matches.
The received Magic Packet does not contain a CRC error.
The Magic bit (CONFIG3#5) is set to 1, the PMEn bit (CONFIG1#0) is set to 1, and the RTL8100C(L)
is in isolation state, or the PME# can be asserted in the current power state.
The Magic Packet pattern matches, i.e. 6 * FFh + MISC (can be none) + 16 * DID (Destination ID) in
any part of a valid (Fast) Ethernet packet.
A Wakeup Frame event occurs only when the following conditions are met:
The destination address of the received Wakeup Frame matches.
The received Wakeup Frame does not contain a CRC error.
The PMEn bit (CONFIG1#0) is set to 1.
The 8-bit CRC* (or 16-bit CRC**) of the received Wakeup Frame matches with the 8-bit CRC (or
16-bit CRC) of the sample Wakeup Frame pattern received from the local machine’s OS.
The last masked byte*** of the received Wakeup Frame matches with the last masked byte*** of the
sample Wakeup Frame pattern provided by the local machine’s OS (In Long Wakeup Frame mode, the
last masked byte field is replaced with the high byte of the 16-bit CRC).
*8-bit CRC:
8-bit CRC logic is used to generate an 8-bit CRC from the masked bytes of the received Wakeup Frame
packet within offset 12 to 75. Software should calculate the 8-bit Power Management CRC for each
specific sample wakeup frame and store the calculated CRC in the corresponding CRC register for the
RTL8100C(L) to check whether there is a Wakeup Frame coming in.
相關PDF資料
PDF描述
RTL8100CL SINGLE-CHIP FAST ETHERNET CONTROLLER WITH POWER MANAGEMENT
RTL8130 REALTEK SINGLE CHIP FAST ETHERNET CONTROLLER WITH POWER MANAGEMENT
RTL8100 REALTEK SINGLE CHIP FAST ETHERNET CONTROLLER WITH POWER MANAGEMENT
RTL8100B REALTEK SINGLE CHIP FAST ETHERNET CONTROLLER WITH POWER MANAGEMENT
RTL8100BL REALTEK SINGLE CHIP FAST ETHERNET CONTROLLER WITH POWER MANAGEMENT
相關代理商/技術參數
參數描述
RTL8100CL-LF 制造商:Realtek Semiconductor 功能描述:RTL8100CL Series 3.6 V Fast Ethernet Controller with Power Management LQFP-128
RTL8100L 制造商:未知廠家 制造商全稱:未知廠家 功能描述:REALTEK SINGLE CHIP FAST ETHERNET CONTROLLER WITH POWER MANAGEMENT
RTL8101 制造商:未知廠家 制造商全稱:未知廠家 功能描述:REALTEK SINGLE CHIP FAST ETHERNET CONTROLLER WITH POWER MANAGEMENT
RTL8101L 制造商:未知廠家 制造商全稱:未知廠家 功能描述:REALTEK SINGLE CHIP FAST ETHERNET CONTROLLER AND MC97 CONTROLLER WITH POWER MANAGEMENT
RTL8101LLQFP 制造商:未知廠家 制造商全稱:未知廠家 功能描述:REALTEK SINGLE CHIP FAST ETHERNET CONTROLLER AND MC97 CONTROLLER WITH POWER MANAGEMENT
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*