10
S29AL004D Known Good Die
S29AL004D_KGD_A2 April 14, 2006
Data
Shee t
Suppleme nt
Physical Specifications
Die dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 mils X 87 mils
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9 mm x 2.33 mm
Die Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 m
Bond Pad Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.19 mils x 3.19 mils
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81m x 81 m
Pad Area Free of Passivation . . . . . . . . . . . . . . . . . . . . . . . . . . . .10.18 mils2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6,561 m2
Pads Per Die . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Bond Pad Metalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Al/Cu
Die Backside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No metal
Passivation
Nitride/SOG/Nitride
DC Operating Conditions
VCC (Supply Voltage) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7 V to 3.6 V
Operating Temperature
Commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Automotive in Cabin . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +105°C
Manufacturing Information
Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Spansion
Test
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . JV3
Manufacturing ID (Top Boot) . . . . . . . . . . . . . . . . . . . . . . 98F10AK, 98F10AG
(Bottom Boot) . . . . . . . . . . . . . . . . . . . . . . . . . 98F10ABK, 98F10ABG
Preparation for Shipment
Penang, Malaysia
Fabrication Process
CS49SS
Die Revision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Special Handling Instructions
Processing
Do not expose KGD products to ultraviolet light or process them at temperatures
greater than 250°C. Failure to adhere to these handling instructions will result in
irreparable damage to the devices. For best yield, Spansion recommends assem-
bly in a Class 10K clean room with 30% to 60% relative humidity.
Storage
Store at a maximum temperature of 30°C in a nitrogen-purged cabinet or vac-
uum-sealed bag. Observe all standard ESD handling procedures.