參數資料
型號： S29CL032J0RFAN130
廠商： SPANSION LLC
元件分類： PROM
英文描述： 1M X 32 FLASH 3.3V PROM, 48 ns, PBGA80
封裝： 13 X 11 MM, 1 MM PITCH, FORTIFIED, BGA-80
文件頁數： 40/78頁
文件大小： 1825K
代理商： S29CL032J0RFAN130
September 27, 2006 S29CD-J_CL-J_00_B1
S29CD-J & S29CL-J Flash Family
43
Pr el im i n a r y
3. If the PPB Lock Bit is set, the PPB Program or erase command does not execute and times-
out without programming or erasing the PPB.
9.2.1
Programming PPB
The PPB Program Command is used to program, or set, a given PPB. The first three cycles in the
PPB Program Command are standard unlock cycles. The fourth cycle in the PPB Program Com-
mand executes the pulse which programs the specified PPB. The user must wait either 100 s or
until DQ6 stops toggling before executing the fifth cycle, which is the read verify portion of the
PPB Program Command. The sixth cycle outputs the status of the PPB Program operation.
In the event that the program PPB operation was not successful, the user can loop directly to the
fourth cycle of the PPB Program Command to perform the program pulse and read verification
again. After four unsuccessful loops through the program pulse and read verification cycles the
PPB programming operation should be considered a failure.
Figure 9.2 PBB Program Operation
9.2.2
Erasing PPB
The All PPB Erase command is used to erase all the PPBs in bulk. There are no means for indi-
vidually erasing a specific PPB. The first three cycles of the PPB Erase command are standard
unlock cycles. The fourth cycle executes the erase pulse to all the PBBs. The user must wait ei-
ther 20ms or until DQ6 stops toggling before executing the fifth cycle, which is the read verify
portion of the PPB Erase Command. The sixth cycle outputs the status of the PPB Erase
operation.
In the event that the erase PPB operation was not successful, the user can loop directly to the
fourth cycle of the All PPB Erase Command to perform the erase pulse and read verification
again. After four unsuccessful loops through the erase pulse and read verification cycles, the PPB
erasing operation should be considered a failure.
Note:
Either poll DQ6 in the
small bank and wait for
it to stop toggling OR
wait 100us
DQ0=1?
Write 0x68 to SG+WP
Write 0x48 to SG+WP
Read from SG+WP
YES
NO
5
th attempt?
YES
NO
Note: Reads from the
small bank at this point
return the status of the
operation, not read array
data.
Done
Error
Write 0xAA to 0x555
Write 0x55 to 0x2AA
Write 0x60 to 0x555
相關PDF資料
PDF描述
S29CL032J0RFFI110 1M X 32 FLASH 3.3V PROM, 48 ns, PBGA80
S29CL032J0RFFN130 1M X 32 FLASH 3.3V PROM, 48 ns, PBGA80
S29CL032J1JFAI110 1M X 32 FLASH 3.3V PROM, 54 ns, PBGA80
S29CL032J1MFAN120 1M X 32 FLASH 3.3V PROM, 54 ns, PBGA80
S29CL032J0PQAN102 1M X 32 FLASH 3.3V PROM, 54 ns, PQFP80
相關代理商/技術參數
參數描述
S29GL016A 制造商:SPANSION 制造商全稱:SPANSION 功能描述:64 Megabit, 32 Megabit, and 16 Megabit 3.0-Volt only Page Mode Flash Memory Featuring 200 nm MirrorBit Process Technology
S29GL016A100BAI010 制造商:SPANSION 制造商全稱:SPANSION 功能描述:64 Megabit, 32 Megabit, and 16 Megabit 3.0-Volt only Page Mode Flash Memory Featuring 200 nm MirrorBit Process Technology
S29GL016A100BAI012 制造商:SPANSION 制造商全稱:SPANSION 功能描述:64 Megabit, 32 Megabit, and 16 Megabit 3.0-Volt only Page Mode Flash Memory Featuring 200 nm MirrorBit Process Technology
S29GL016A100BAI013 制造商:SPANSION 制造商全稱:SPANSION 功能描述:64 Megabit, 32 Megabit, and 16 Megabit 3.0-Volt only Page Mode Flash Memory Featuring 200 nm MirrorBit Process Technology
S29GL016A100BAIR10 制造商:SPANSION 制造商全稱:SPANSION 功能描述:64 Megabit, 32 Megabit, and 16 Megabit 3.0-Volt only Page Mode Flash Memory Featuring 200 nm MirrorBit Process Technology
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*