參數資料
型號: SC16C750BIBS,151
廠商: NXP Semiconductors
文件頁數: 18/44頁
文件大?。?/td> 0K
描述: IC UART SINGLE W/FIFO 32-HVQFN
產品培訓模塊: Stand-Alone UARTs
標準包裝: 490
通道數: 1,UART
FIFO's: 64 字節
電源電壓: 2.5V,3.3V,5V
帶自動流量控制功能:
帶故障啟動位檢測功能:
帶調制解調器控制功能:
帶CMOS:
安裝類型: 表面貼裝
封裝/外殼: 32-VFQFN 裸露焊盤
供應商設備封裝: 32-HVQFN(5x5)
包裝: 托盤
產品目錄頁面: 828 (CN2011-ZH PDF)
其它名稱: 568-3285
935276388151
SC16C750BIBS-S
SC16C750B_5
NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 05 — 17 October 2008
25 of 44
NXP Semiconductors
SC16C750B
5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs
7.8 Modem Status Register (MSR)
This register provides the current state of the control interface signals from the modem, or
other peripheral device to which the SC16C750B is connected. Four bits of this register
are used to indicate the changed information. These bits are set to a logic 1 whenever a
control input from the modem changes state. These bits are set to a logic 0 whenever the
CPU reads this register.
[1]
Whenever any MSR[0:3] is set to logic 1, a Modem Status Interrupt will be generated.
Table 21.
Modem Status Register bits description
Bit
Symbol
Description
7
MSR[7]
Data Carrier Detect. DCD (active HIGH, logic 1). Normally this bit is the
complement of the DCD input. In the Loopback mode this bit is equivalent to
the OUT2 bit in the MCR register.
6
MSR[6]
Ring Indicator. RI (active HIGH, logic 1). Normally this bit is the complement
of the RI input. In the Loopback mode this bit is equivalent to the OUT1 bit in
the MCR register.
5
MSR[5]
Data Set Ready. DSR (active HIGH, logic 1). Normally this bit is the
complement of the DSR input. In Loopback mode this bit is equivalent to the
DTR bit in the MCR register.
4
MSR[4]
Clear To Send. CTS. CTS functions as hardware ow control signal input if it
is enabled via MCR[5]. Flow control (when enabled) allows starting and
stopping the transmissions based on the external modem CTS signal. A
logic 1 at the CTS pin will stop SC16C750B transmissions as soon as current
character has nished transmission. Normally MSR[4] is the complement of
the CTS input. However, in the Loopback mode, this bit is equivalent to the
RTS bit in the MCR register.
3
MSR[3]
DCD [1]
logic 0 = no DCD change (normal default condition)
logic 1 = the DCD input to the SC16C750B has changed state since the last
time it was read. A modem Status Interrupt will be generated.
2
MSR[2]
RI [1]
logic 0 = no RI change (normal default condition)
logic 1 = the RI input to the SC16C750B has changed from a logic 0 to a
logic 1. A modem Status Interrupt will be generated.
1
MSR[1]
DSR [1]
logic 0 = no DSR change (normal default condition)
logic 1 = the DSR input to the SC16C750B has changed state since the last
time it was read. A modem Status Interrupt will be generated.
0
MSR[0]
CTS [1]
logic 0 = no CTS change (normal default condition)
logic 1 = the CTS input to the SC16C750B has changed state since the last
time it was read. A modem Status Interrupt will be generated.
相關PDF資料
PDF描述
MS27484T14A35S CONN PLUG 37POS STRAIGHT W/SCKT
SC16C750BIA44,518 IC UART SINGLE W/FIFO 44-PLCC
SCC2691AC1A28,602 IC UART SINGLE 28-PLCC
SC16IS762IPW-T IC UART DUAL I2C/SPI 28-TSSOP
SC16C2550BIA44,529 IC UART DUAL W/FIFO 44-PLCC
相關代理商/技術參數
參數描述
SC16C750BIBS-F 功能描述:UART 接口集成電路 16CB 2.5V-5V 1CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C750BIBS-S 制造商:NXP Semiconductors 功能描述:UART 1-CH 64Byte FIFO 2.5V/3.3V/5V 32-Pin HVQFN EP Tray
SC16C750IA44 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFO
SC16C750IA44,512 功能描述:UART 接口集成電路 16C 2.5V-5V 1CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C750IA44,518 功能描述:UART 接口集成電路 16C 2.5V-5V 1CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel