Si5366
Rev. 1.0
7
2-Level LVCMOS Input Pins
Input Voltage Low
VIL
VDD =1.71V
—
0.5
V
VDD =2.25V
—
0.7
V
VDD =2.97V
—
0.8
V
Input Voltage High
VIH
VDD =1.89V
1.4
—
V
VDD =2.25V
1.8
—
V
VDD =3.63V
2.5
—
V
Table 2. DC Characteristics (Continued)
(VDD = 1.8 ± 5%, 2.5 ±10%, or 3.3 V ±10%, TA = –40 to 85 °C)
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Notes:
1. Current draw is independent of supply voltage
2. No under- or overshoot is allowed.
3. LVPECL outputs require nominal VDD
≥ 2.5 V.
4. This is the amount of leakage that the 3-Level inputs can tolerate from an external driver. See Si53xx Family Reference
Manual for more details.
5. LVPECL, CML, LVDS and low-swing LVDS measured with Fo = 622.08 MHz.
6. The LVPECL and CMOS output formats draw more current than either LVDS or CML; however, there are restrictions in
the allowed output format pin settings so that the maximum power dissipation for the TQFP devices is limited when they
are operated at 3.3 V. When there are four enabled LVPECL or CMOS outputs, the fifth output must be disabled. When
there are five enabled outputs, there can be no more than three outputs that are either LVPECL or CMOS.