參數資料
型號： TDA6650ATT/C3
廠商： NXP SEMICONDUCTORS
元件分類： 消費家電
英文描述： SPECIALTY CONSUMER CIRCUIT, PDSO38
封裝： 4.40 MM, 0.50 MM PITCH, PLASTIC, MO-153, SOT510-1, TSSOP-38
文件頁數： 44/54頁
文件大?。?/td> 325K
代理商： TDA6650ATT/C3
TDA6650ATT_6651ATT_2
NXP B.V. 2007. All rights reserved.
Product data sheet
Rev. 02 — 2 February 2007
49 of 54
NXP Semiconductors
TDA6650ATT; TDA6651ATT
5 V mixer/oscillator and low noise PLL synthesizer
15. Handling information
Inputs and outputs are protected against electrostatic discharge in normal handling.
However, to be completely safe you must take normal precautions appropriate to handling
integrated circuits.
16. Soldering
This text provides a very brief insight into a complex technology. A more in-depth account
of soldering ICs can be found in Application Note
AN10365 “Surface mount reow
soldering description”.
16.1 Introduction to soldering
Soldering is one of the most common methods through which packages are attached to
Printed Circuit Boards (PCBs), to form electrical circuits. The soldered joint provides both
the mechanical and the electrical connection. There is no single soldering method that is
ideal for all IC packages. Wave soldering is often preferred when through-hole and
Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not
suitable for ne pitch SMDs. Reow soldering is ideal for the small pitches and high
densities that come with increased miniaturization.
16.2 Wave and reow soldering
Wave soldering is a joining technology in which the joints are made by solder coming from
a standing wave of liquid solder. The wave soldering process is suitable for the following:
Through-hole components
Leaded or leadless SMDs, which are glued to the surface of the printed circuit board
Not all SMDs can be wave soldered. Packages with solder balls, and some leadless
packages which have solder lands underneath the body, cannot be wave soldered. Also,
leaded SMDs with leads having a pitch smaller than ~0.6 mm cannot be wave soldered,
due to an increased probability of bridging.
The reow soldering process involves applying solder paste to a board, followed by
component placement and exposure to a temperature prole. Leaded packages,
packages with solder balls, and leadless packages are all reow solderable.
Key characteristics in both wave and reow soldering are:
Board specications, including the board nish, solder masks and vias
Package footprints, including solder thieves and orientation
The moisture sensitivity level of the packages
Package placement
Inspection and repair
Lead-free soldering versus PbSn soldering
16.3 Wave soldering
Key characteristics in wave soldering are:
相關PDF資料
PDF描述
TDA6811 SPECIALTY CONSUMER CIRCUIT, PDIP18
TDA6812-5 2 CHANNEL(S), TONE CONTROL CIRCUIT, PDIP40
TDA6920 7-CHANNEL, AUDIO/VIDEO SWITCH, PDIP18
TDA6930S AM, AUDIO/VIDEO DEMODULATOR, PDIP30
TDA6930X AM, AUDIO/VIDEO DEMODULATOR, PDSO28
相關代理商/技術參數
參數描述
TDA6650TT 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:5 V mixer/oscillator and low noise PLL synthesizer for hybrid terrestrial tuner (digital and analog)
TDA6650TT/C3 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:5 V mixer/oscillator and low noise PLL synthesizer for hybrid terrestrial tuner (digital and analog)
TDA6650TT/C3/S2 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:5 V mixer/oscillator and low noise PLL synthesizer for hybrid terrestrial tuner (digital and analog)
TDA6651 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:5 V mixer/oscillator and low noise PLL synthesizer for hybrid terrestrial tuner (digital and analog)
TDA6651ATT 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:5 V mixer/oscillator and low noise PLL synthesizer for hybrid terrestrial tuner (digital and analog)
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*