參數資料
型號： TH50VSF3681AASB
廠商： Toshiba Corporation
英文描述： GT 10C 10#16 SKT RECP BOX RM
中文描述： SRAM和閃存混合多芯片封裝
文件頁數： 25/55頁
文件大小： 585K
代理商： TH50VSF3681AASB
TH50VSF3680/3681AASB
2001-03-06 25/55
ID Read Mode
ID Read mode is used to read the device maker code and device code. The mode is useful for EPROM
programmers to automatically identify the device type.
In this method, simultaneous operation can be performed. Inputting an ID Read command sets the specified
bank to ID Read mode. Banks are specified by inputting the bank address (BK) in the third bus write cycle of the
command cycle. To read an ID code, the bank address as well as the ID read address must be specified. From
address BK
+
00 the maker code is output; from address BK
+
01 the device code is output. From other banks,
data are output from the memory cells. Inputting a Reset command releases ID Read mode and returns the
device to Read mode.
Access time in ID Read mode is the same as that in Read mode. For the codes, see the ID Code Table.
Standby Mode
There are two methods of entering Standby mode.
(1) Control using CEF and RESET
When the device is in Read mode, input V
DD
±
0.3 V to CEF and RESET . The device enters Standby
mode and the current becomes standby current (I
CCS1
). However, if the device is in simultaneous operation,
the device does not enter Standby mode but causes the operating current to flow.
(2) Control using only RESET
When the device is in Read mode, input V
SS
±
0.3 V to RESET . The device enters Standby mode and the
current becomes standby current (I
CCS1
). Even if the device is in simultaneous operation, this method can
terminate the current operation and set the device to Standby mode. This is a hardware reset, described
later.
In standby mode, DQ is put in high-impedance state.
Auto Sleep Mode
Function which suppresses power dissipation during read. When address input does not change for 150 ns or
longer, the device automatically enters Sleep mode and the current becomes standby current (I
CCS1
). However, if
the device is in simultaneous operation, the device does not enter Standby mode but causes the operating current
to flow. Because the output data are latched, data are output in Sleep mode. When the address is changed, Sleep
mode is automatically released, outputting data from the changed address.
Output Disable Mode
Inputting V
IH
to OE disables output from the device, setting DQ to high-impedance.
相關PDF資料
PDF描述
TH513 RF & MICROWAVE TRANSISTORS HF SSB APPLICATIONS
TH560 RF & MICROWAVE TRANSISTORS HF SSB APPLICATIONS
TH562 RF & MICROWAVE TRANSISTORS HF SSB APPLICATIONS
TH58100FT TENTATIVE TOSHIBA MOS DIGITAL INTEGRATED CIRCUIT SILICON GATE CMOS
TH58NVG1S3AFT TOSHIBA MOS DIGITAL INTEGRATED CIRCUIT SILICON GATE CMOS
相關代理商/技術參數
參數描述
TH510100000 制造商:JOHNSON ELECTRIC 功能描述:LIGHT PUSHBUTTON SWITCHES, 5 AMPS, 250VAC, RECTANGULAR MAINTAINED SWITCH
TH510108000 制造商:Johnson Electric / Saia-Burgess 功能描述:S.P. LATCHING SWITCH
TH510208000 制造商:Johnson Electric / Saia-Burgess 功能描述:D.P. LATCHING SWITCH
TH511000000 制造商:Johnson Electric / Saia-Burgess 功能描述:Rectangular latching pushbutton switch
TH511008000 制造商:JOHNSON ELECTRIC 功能描述:Switch Body;TP2 Series;Latching;18x24mm;Exposed Bezel;IP40;Faston;16.2mm Dia Mtg
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*