
176
μ
PD75517(A)
APPENDIX A SERIES PRODUCT FUNCTIONS
Notes 1.
No mask option is provided for the
μ
PD75P516 and
μ
PD75P518.
Only in the
μ
PD75P516 and
μ
PD75P518
2.
μ
PD75517
μ
PD75517(A)
24448
μ
PD75516
μ
PD75516(A)
16256
μ
PD75P516
16256 (PROM)
Product
Item
μ
PD75P518
32640 (PROM)
ROM (bytes)
RAM (
×
4 bits)
General register
Machine
cycle
I/O port
A/D converter
Operating
voltage
Timer/counter
Serial interface
Interrupt
Instruction set
Operating supply
voltage
Package
Main-
system
clock
Subsystem
clock
Total
CMOS
input
CMOS I/O
N-ch
open-
drain I/O
0.95
μ
s/1.91
μ
s/15.3
μ
s (at 4.19 MHz)
1024
512
(4 bits
×
8 or 8 bits
×
4)
×
4 banks
0.67
μ
s/1.33
μ
s/2.67
μ
s/10.7
μ
s (at 6.0 MHz)
0.95
μ
s/1.91
μ
s/3.82
μ
s/15.3
μ
s (at 4.19 MHz)
122
μ
s (at 32.768 kHz)
64
16 (Shared with INT and SIO. Seven lines can be pulled up by software)
28 (LED direct driving and shared with SIO and PPO)
16 lines can be pulled up by software.
Four lines can be pulled down by the mask option.
20 (Eight lines for driving LEDs. Withstand
voltage is 10 V. 20 lines can be pulled up
by the mask option.)
8-bit resolution
×
8 ch (successive approximation)
V
DD
= 2.7 to 6.0 V
V
DD
= 3.5 to 6.0 V
4 channels
Timer/event counter
Basic interval timer
Timer/pulse generator (14-bit PWM output possible)
Clock timer
2 channels
NEC standard serial bus interface (SBI)/three-wire SIO : One channel
General synchronous serial interface (three-wire SIO) : One channel
Vectored interrupt: Seven sources (External: 3, Internal: 4)
Test input:
Two sources
Clock test flag is provided.
Parallel-edge-sensitive flag for key scan input is provided.
(External: 1, Internal: 1)
Set/reset/test/Boolean operation for bit data
4-bit data transfer, arithmetic/logical, addition/subtraction and comparison
8-bit data transfer, arithmetic/logical, addition/subtraction and comparison
2.7 to 6.0 V
4.75 to 5.5 V
80-pin plastic QFP
80-pin ceramic LCC with a window
Note 2
20 (Eight lines for driving LEDs. Withstand
voltage is 9 V. 20 lines can be pulled up by
the mask option.)