參數資料
型號： 101-0411
廠商： Rabbit Semiconductor
文件頁數： 49/90頁
文件大?。?/td> 0K
描述： INTERFACE 12KEYDISP ETHNT OP6700
標準包裝： 25
系列： SBC
模塊/板類型： 單板計算機模塊
適用于相關產品： OP6700
User’s Manual
49
5.3 How to Set IP Addresses in the Sample Programs
With the introduction of Dynamic C 7.30 we have taken steps to make it easier to run
many of our sample programs. You will see a TCPCONFIG macro. This macro tells
Dynamic C to select your configuration from a list of default configurations. You will
have three choices when you encounter a sample program with the TCPCONFIG macro.
1. You can replace the TCPCONFIG macro with individual MY_IP_ADDRESS,
MY_NETMASK
, MY_GATEWAY, and MY_NAMESERVER macros in each program.
2. You can leave TCPCONFIG at the usual default of 1, which will set the IP configurations
to 10.10.6.100, the netmask to 255.255.255.0, and the nameserver and gateway
to 10.10.6.1. If you would like to change the default values, for example, to use an IP
address of 10.1.1.2 for the Intellicom board, and 10.1.1.1 for your PC, you can edit
the values in the section that directly follows the “General Configuration” comment in
the TCP_CONFIG.LIB library. You will find this library in the LIB\TCPIP directory.
3. You can create a CUSTOM_CONFIG.LIB library and use a TCPCONFIG value greater
than 100. Instructions for doing this are at the beginning of the TCP_CONFIG.LIB
library in the LIB\TCPIP directory.
There are some other “standard” configurations for TCPCONFIG that let you select differ-
ent features such as DHCP. Their values are documented at the top of the
TCP_CONFIG.LIB
library in the LIB\TCPIP directory. More information is available in
the Dynamic C TCP/IP User’s Manual.
IP Addresses Before Dynamic C 7.30
Most of the sample programs use macros to define the IP address assigned to the board and
the IP address of the gateway, if there is a gateway. Instead of the TCPCONFIG macro, you
will see a MY_IP_ADDRESS macro and other macros.
#define MY_IP_ADDRESS "10.10.6.170"
#define MY_NETMASK "255.255.255.0"
#define MY_GATEWAY "10.10.6.1"
#define MY_NAMESERVER "10.10.6.1"
In order to do a direct connection, the following IP addresses can be used for the Intellicom:
#define MY_IP_ADDRESS "10.1.1.2"
#define MY_NETMASK "255.255.255.0"
// #define MY_GATEWAY "10.10.6.1"
// #define MY_NAMESERVER "10.10.6.1"
In this case, the gateway and nameserver are not used, and are commented out. The IP
address of the board is defined to be 10.1.1.2. The IP address of you PC can be defined
as 10.1.1.1.
相關PDF資料
PDF描述
AT24C02A-10PI-2.7 IC EEPROM 2KBIT 400KHZ 8DIP
AT24C02A-10PI-1.8 IC EEPROM 2KBIT 400KHZ 8DIP
25FMN-BMT-A-TF CONN FMN HSNG 25POS SNGL NOR SMD
046239012001800+ CONN FPC ONE-TOUCH LCK .5MM 12
AT24C01-10PI-1.8 IC EEPROM 1KBIT 400KHZ 8DIP
相關代理商/技術參數
參數描述
10104110 制造商:FCI-CONNECTOR 制造商全稱:FCI connector 功能描述:MICRO USB B TYPE RECEPTACLE
10104110-0001LF 功能描述:USB接頭 5P Quick Connect Micro USB TypeB Rcpt RoHS:否 制造商:FCI 產品:USB Type A Connectors 標準:USB 3.0 端口數量: 位置/觸點數量:9 型式:Female 電流額定值:1.8 A 安裝風格:Through Hole 端接類型:Solder Pin 連接器類型:USB 3.0 Receptacle
10104110-0001LF 制造商:FCI 功能描述:MICRO USB B, RECEPTACLE, 5POS, SMT RT AN
10-104-11-01 制造商:Concord Electronics Inc 功能描述:Contact Solder ST Thru-Hole
10-104-11-03 制造商:Concord Electronics Inc 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*