參數資料
型號: 935167440551
廠商: NXP SEMICONDUCTORS
元件分類: 微控制器/微處理器
英文描述: 8-BIT, OTPROM, 16 MHz, MICROCONTROLLER, PQFP80
封裝: 14 X 20 MM, 2.70 MM HEIGHT, PLASTIC, SOT-318-1, QFP-80
文件頁數: 53/112頁
文件大?。?/td> 707K
代理商: 935167440551
1996 Jun 27
45
Philips Semiconductors
Product specication
8-bit microcontroller with on-chip CAN
P8xCE598
13.5.11 OUTPUT CONTROL REGISTER (OCR)
The Output Control Register allows, under software
control, the set-up of different output driver configurations.
This register can be accessed (read/write) if the Reset
Request bit is set HIGH (present). If the CAN-controller is
in the sleep mode (Sleep = HIGH) a recessive level is
output on the CTX0 and CTX1 pins. If the CAN-controller
is in the reset state (Reset Request = HIGH) the output
drivers are floating.
Tables 50 and 51, show the relationship between the bits
of the Output Control Register and the two serial output
pins CTX0 and CTX1 of the P8xCE598 CAN-controller,
connected to the serial bus (see Fig.14).
Table 49 Output Control Register (address 8)
Table 50 Description of the OCR bits
Table 51 Description of the Output Mode bits
76543210
OCTP1
OCTN1
OCPOL1
OCTP0
OCTN0
OCPOL0
OCMODE1
OCMODE0
BIT
SYMBOL
FUNCTION
7
OCTP1
See Tables 51 and 52.
6
OCTN1
5
OCPOL1
4
OCTP0
3
OCTN0
2
OCPOL0
1
OCMODE1
Output Mode.
These bits select the output mode; see Table 51.
0
OCMODE0
OCMODE1
OCMODE0
DESCRIPTION
10
Normal Output Mode. The bit sequence (TXD) is sent via CTX0, CTX1. TXD is the
data bit to be transmitted. The voltage levels on the output driver pins CTX0 and CTX1
depend on both the driver characteristic programmed by OCTPx, OCTNx (oat, pull-up,
pull-down, push-pull) and the output polarity programmed by OCPOLx (see Fig.17).
11
Clock Output Mode. For the CTX0 pin this is the same as in Normal Output Mode
(CTX0: bit sequence). However, the data stream to CTX1 is replaced by the transmit
clock (TXCLK). The rising edge of the transmit clock (non-inverted) marks the beginning
of a bit period. The clock pulse width is tSCL.
00
Bi-phase Output Mode. In contrast to Normal Output Mode the bit representation is
time variant and toggled. If the bus controllers are galvanically decoupled from the
bus-line by a transformer, the bit stream is not allowed to contain a DC component. This
is achieved by the following scheme. During recessive bits all outputs are deactivated
(oating). Dominant bits are sent alternately on CTX0 and CTX1, i.e. the rst dominant
bit is sent on CTX0, the second is sent on CTX1, and the third one is sent on CTX0
again, etc.
01
Test Output Mode. For the CTX0 pin this is the same as in Normal Output Mode
(CTX0: bit sequence). To measure the delay time of the transmitter and receiver this
mode connects the output of the input comparator (COMP OUT) with the input of the
output driver CTX1. This mode is used for production testing only.
相關PDF資料
PDF描述
935167440557 8-BIT, OTPROM, 16 MHz, MICROCONTROLLER, PQFP80
935167560557 8-BIT, 16 MHz, MICROCONTROLLER, PQFP80
935165760551 8-BIT, 16 MHz, MICROCONTROLLER, PQFP80
0673.400 Axial Lead and Cartridge Fuses - Glass Body
0673.500 Axial Lead and Cartridge Fuses - Glass Body
相關代理商/技術參數
參數描述
93516-PIX 制造商:FCI 功能描述:
93517-090001 制造商:FCI 功能描述:PCMCIA REV CARD FRAME 9P
93517-150000 制造商:FCI 功能描述:
93518097J 制造商:Fiskars Brands Inc 功能描述:Fiskars 45mm Rotary Blades - Pinking (Fits Models 195800/154570/19680/19583) (Fr
935181002005 功能描述:電容套件 HiTmpSilCap Kit 0402 1nF 10nF 33nF BD11V RoHS:否 制造商:Nichicon 電容范圍:10 uF to 680 uF 公差范圍: 電壓范圍:6.3 V to 25 V 產品:Aluminum Organic Polymer Capacitor Kit