參數資料
型號： 935289802118
廠商： NXP SEMICONDUCTORS
元件分類： 顯示驅動器
英文描述： LED DISPLAY DRIVER, PDSO28
封裝： 4.40 MM, PLASTIC, MO-153, SOT361-1, TSSOP-28
文件頁數： 7/54頁
文件大?。?/td> 410K
代理商： 935289802118
PCA9685_2
NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 02 — 16 July 2009
15 of 50
NXP Semiconductors
PCA9685
16-channel, 12-bit PWM Fm+ I2C-bus LED controller
7.3.2 Mode register 2, MODE2
[1]
See Section 7.7 “Using the PCA9685 with and without external drivers” for more details. Normal LEDs can be driven directly in either
mode. Some newer LEDs include integrated Zener diodes to limit voltage transients, reduce EMI, protect the LEDs and these must be
driven only in the open-drain mode to prevent overheating the IC.
[2]
Change of the outputs at the STOP command allows synchronizing outputs of more than one PCA9685. Applicable to registers from
06h (LED0_ON_L) to 45h (LED15_OFF_H) only. 1 or more registers can be written, in any order, before STOP.
[3]
Update on ACK requires all 4 PWM channel registers to be loaded before outputs will change on the last ACK.
[4]
7.3.3 LED output and PWM control
The turn-on time of each LED driver output and the duty cycle of PWM can be controlled
independently using the LEDn_ON and LEDn_OFF registers.
There will be two 12-bit registers per LED output. These registers will be programmed by
the user. Both registers will hold a value from 0 to 4095. One 12-bit register will hold a
value for the ON time and the other 12-bit register will hold the value for the OFF time. The
ON and OFF times are compared with the value of a 12-bit counter that will be running
continuously from 0000h to 0FFFh (0 to 4095 decimal).
Update on ACK requires all 4 PWM channel registers to be loaded before outputs will
change on the last ACK.
The ON time, which is programmable, will be the time the LED output will be asserted and
the OFF time, which is also programmable, will be the time when the LED output will be
negated. In this way, the phase shift becomes completely programmable. The resolution
for the phase shift is 1
4096 of the target frequency. Table 6 lists these registers.
The following two examples illustrate how to calculate values to be loaded into these
registers.
Table 5.
MODE2 - Mode register 2 (address 01h) bit description
Legend: * default value.
Bit
Symbol
Access
Value
Description
7 to 5
-
read only
000*
reserved
4
INVRT[1]
R/W
0*
Output logic state not inverted. Value to use when external driver used.
Applicable when OE = 0.
1
Output logic state inverted. Value to use when no external driver used.
Applicable when OE = 0.
3
OCH
R/W
0*
Outputs change on STOP command[2].
1
Outputs change on ACK[3].
2
OUTDRV[1]
R/W
0
The 16 LEDn outputs are congured with an open-drain structure.
1*
The 16 LEDn outputs are congured with a totem pole structure.
1 to 0
OUTNE[1:0][4]
R/W
00*
When OE = 1 (output drivers not enabled), LEDn = 0.
01
When OE = 1 (output drivers not enabled):
LEDn = 1 when OUTDRV = 1
LEDn = high-impedance when OUTDRV = 0 (same as OUTNE[1:0] = 10)
1X
When OE = 1 (output drivers not enabled), LEDn = high-impedance.
相關PDF資料
PDF描述
935288883112 DATACOM, INTERFACE CIRCUIT, PDSO8
935288883115 DATACOM, INTERFACE CIRCUIT, PDSO8
935288883118 DATACOM, INTERFACE CIRCUIT, PDSO8
935085330112 DATACOM, INTERFACE CIRCUIT, PDSO8
935085330115 DATACOM, INTERFACE CIRCUIT, PDSO8
相關代理商/技術參數
參數描述
9-3528-TP 制造商:Keystone Electronics Corp 功能描述:
935290014599 制造商:NXP Semiconductors 功能描述:KIT OM12097
935290808118 制造商:NXP Semiconductors 功能描述:IC ANALOG SWITCH 8CH 16TSSOP
935290809118 制造商:NXP Semiconductors 功能描述:IC ANALOG SWITCH SPDT 16TSSOP
935290874112 制造商:NXP Semiconductors 功能描述:IC PWR AMP I2C BUS CTRL DBS27P
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*