參數資料
型號： ADUC7023BCPZ62I-RL
廠商： Analog Devices Inc
文件頁數： 8/96頁
文件大小： 0K
描述： IC MCU 12BIT 62KB FLASH 32LFCSP
標準包裝： 5,000
系列： MicroConverter® ADuC7xxx
核心處理器： ARM7
芯體尺寸： 16/32-位
速度： 44MHz
連通性： I²C，SPI
外圍設備： POR，PWM，WDT
輸入/輸出數： 12
程序存儲器容量： 64KB（32K x 16）
程序存儲器類型： 閃存
RAM 容量： 2K x 32
電壓 - 電源 (Vcc/Vdd)： 2.7 V ~ 3.6 V
數據轉換器： A/D 8x12b，D/A 4x12b
振蕩器型： 內部
工作溫度： -40°C ~ 125°C
封裝/外殼： 32-WFQFN 裸露焊盤，CSP
包裝： 帶卷 (TR)
ADuC7023
Data Sheet
| Page 16 of 96
Pin No.
40-
LFCSP
32-
LFCSP
36-
WLCSP
Mnemonic
Description
28
24
C3
P0.3/PLAO[9]/TCK
The default value of this pin depends on the level of P0.0/BM. If P0.0/BM =
0, this pin defaults to a general purpose input. If P0.0/BM = 1, this pin
defaults to a JTAG test data clock pin. This is a multifunction pin as follows:
General-Purpose Input and Output Port 0.3.
Programmable Logic Array Output Element 9.
Test Clock, JTAG Test Port Clock Input. Debug and download access. When
debugging the part via JTAG, this pin must not be toggled by user code
and the GP0CON/GP0DAT register bits affecting this pin must not be
changed.
17
13
E3
DGND
Digital Ground.
18
14
F3
IOVDD
3.3 V Supply for GPIO and Input of the On-Chip Voltage Regulator.
19
15
D3
LVDD
2.6 V Output of the On-Chip Voltage Regulator. This output must be
connected to a 0.47 F capacitor to DGND only.
20
16
F2
RST
Reset Input, Active Low.
23
19
E1
RTCK
Return JTAG Clock Signal. This is not the standard JTAG clock signal. It is
an output signal from the JTAG controller. If using a 20-lead JTAG header,
connect to Pin 11.
9
7
F6
P0.4/IRQ0/SCL0/PLAI[0]/CONV
General-Purpose Input and Output Port 0.4/External Interrupt Request 0/ I2C0
Clock Signal/Programmable Logic Array Input Element 0/ADC External
Convert Start. By default, this pin is configured as a digital input with a
weak pull-up resistor enabled.
10
8
E5
P0.5/SDA0/PLAI[1]/COMPOUT
General-Purpose Input and Output Port 0.5/I2C0 Data Signal/ Programmable
Logic Array Input Element 1/Voltage Comparator Output. By default, this
pin is configured as a digital input with a weak pull-up resistor enabled.
11
9
F5
P0.6/MISO/SCL1/PLAI[2]
General-Purpose Input and Output Port 0.6/SPI MISO Signal/I2C1 Clock On
32-Lead and 36-Ball Packages/Programmable Logic Array Input Element 2.
By default, this pin is configured as a digital input with a weak pull-up
resistor enabled.
12
10
D4
P0.7/MOSI/SDA1/PLAO[0]
General-Purpose Input and Output Port 0.7/SPI MOSI Signal/I2C1 Data
Signal On 32-Lead and 36-Ball Packages/Programmable Logic Array Output
Element 0.
By default, this pin is configured as a digital input with a weak pull-up
resistor enabled.
21
17
F1
XCLKI
Input to the Crystal Oscillator Inverter and Input to the Internal Clock
Generator Circuits. Connect to DGND if unused.
22
18
E2
XCLKO
Output from the Crystal Oscillator Inverter. Leave unconnected if unused.
16
N/A
P1.7/PWM3/SDA1/PLAI[6]
General-Purpose Input and Output Port 1.7/PWM Output 3/I2C1 Data
Signal/Programmable Logic Array Input Element 6. By default, this pin is
configured as a digital input with a weak pull-up resistor enabled.
15
N/A
P1.6/PWM2/SCL1/PLAI[5]
General-Purpose Input and Output Port 1.6/PWM Output 2/I2C1 Clock
Signal/Programmable Logic Array Input Element 5. By default, this pin is
configured as a digital input with a weak pull-up resistor enabled.
29
N/A
P1.5/ADC6/PWMTRIPINPUT/PLAO[4]
General-Purpose Input and Output Port 1.5/ADC Single-Ended or
Differential Analog Input 6/PWMTRIPINPUT/Programmable Logic Array Output
Element 4. By default, this pin is configured as a digital input with a weak
pull-up resistor enabled. When used as ADC input, the pull-up resistor
should be disabled manually.
7
N/A
P1.4/ADC10/PLAO[3]
General-Purpose Input and Output Port 1.4/ADC Single-Ended or Dif-
ferential Analog Input 10/Programmable Logic Array Output Element 3.
By default, this pin is configured as a digital input with a weak pull-up
resistor enabled. When used as ADC input, the pull-up resistor should be
disabled manually.
Rev. E
相關PDF資料
PDF描述
ATMEGA32L-8MUR MCU AVR 32K FLASH 8MHZ 44QFN
ATMEGA32-16MUR MCU AVR 32KB FLASH 16MHZ 44QFN
ADG528ATQ IC MULTIPLEXER 8X1 18CDIP
AD7511DIKNZ IC SWITCH QUAD SPST 16DIP
LX128V-5FN208C IC SWITCH DIGITAL 208FPBGA
相關代理商/技術參數
參數描述
ADUC7024 制造商:AD 制造商全稱:Analog Devices 功能描述:Precision Analog Microcontroller 12-bit Analog I/O, ARM7TDMI MCU
ADUC7024BCP62 制造商:Analog Devices 功能描述:FLASH ARM7+10-CH,12-B ADC &2X12-B DAC IC - Trays
ADUC7024BCP62-U1 制造商:Analog Devices 功能描述:FLASH ARM7+10-CH,12-B ADC &2X12-B DAC IC - Trays
ADUC7024BCPZ62 功能描述:IC MCU FLSH 62K ANLG I/O 64LFCSP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:MicroConverter® ADuC7xxx 標準包裝:60 系列:PSOC® 3 CY8C38xx 核心處理器:8051 芯體尺寸:8-位 速度:67MHz 連通性:EBI/EMI，I²C，LIN，SPI，UART/USART 外圍設備:電容感應，DMA，LCD，POR，PWM，WDT 輸入/輸出數:25 程序存儲器容量:64KB（64K x 8） 程序存儲器類型:閃存 EEPROM 大小:2K x 8 RAM 容量:8K x 8 電壓 - 電源 (Vcc/Vdd):1.71 V ~ 5.5 V 數據轉換器:A/D 2x20b，D/A 4x8b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:48-VFQFN 裸露焊盤 包裝:托盤
ADUC7024BCPZ62I 功能描述:IC MCU 12BIT 1MSPS ANLG 64LFCSP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:MicroConverter® ADuC7xxx 標準包裝:38 系列:Encore!® XP® 核心處理器:eZ8 芯體尺寸:8-位 速度:5MHz 連通性:IrDA，UART/USART 外圍設備:欠壓檢測/復位，LED，POR，PWM，WDT 輸入/輸出數:16 程序存儲器容量:4KB（4K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 3.6 V 數據轉換器:- 振蕩器型:內部 工作溫度:-40°C ~ 105°C 封裝/外殼:20-SOIC（0.295"，7.50mm 寬） 包裝:管件 其它名稱:269-4116Z8F0413SH005EG-ND
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*