參數資料
型號： AS8510-ASST-500
廠商： ams
文件頁數： 15/47頁
文件大?。?/td> 0K
描述： IC BATTERY MANAGEMENT 20-SSOP
產品培訓模塊： AS8510 Data Acquisition IC
標準包裝： 1
類型： 電池管理
輸入類型： 模擬，數字
輸出類型： 模擬，數字
接口： SPI 串行
電流 - 電源： 5.5mA
安裝類型： 表面貼裝
封裝/外殼： 20-SSOP（0.209"，5.30mm 寬）
供應商設備封裝： 20-SSOP
包裝： 標準包裝
其它名稱： AS8510-ASST-500DKR
Revision 3.5
21 - 46
AS8510
Datasheet - Detailed Descr i p ti on
7.4.4 Standby Mode2 (SBM2)
Standby Mode 2 is an extension of the Standby Mode1 to achieve even a lower power in the data acquisition system by providing interrupt to the
microcontroller only when the data sample exceeds the set current threshold. The Standby Mode can be entered only through the STOP state.
Transition to SBM2 mode occurs when the “START BIT” D0 of Mode Control register MOD_CTL_REG in Table 33 is set to “1” and Mode Control
Bits D7,D6 to “1,1” through SPI. In this mode the date rate is programmable with the time of Ta in the Ta control registers B, C. The data sample
is made available and an interrupt signal is generated on INT pin only when the input signal exceeds the threshold set in Current Threshold
Registers D,E. It should be noted here that the data is stable for Ta secs. The functionality is illustrated in Figure 8.
Figure 8. Standby Mode 2
7.5 Reference-Voltage
Band gap-reference voltage is used for the ADC as a reference and for the generation of the current for external temperature measurement.
7.6 Oscillators
A High-speed oscillator (HS) generates the oversampling clock. For internal state machine and Interrupt generation, a low-speed Oscillator (LS)
is also available.
7.7 Power-On Reset
The AS8510 has PORs, APOR and DPOR on analog and digital power supplies respectively. On PORs of both supplies, initialization sequence
happens and the system status is shown in state diagram (see Figure 4).
As shown in the state diagram, the system is in RESET state until DPOR output goes to logic HIGH and subsequently until APOR output goes to
logic HIGH. Once analog power supply is available, the system goes into OTP_INT state and loads the default values into the control and data
registers and goes into STOP state. If analog POR, APOR goes low at any time, the system goes into RESET state. In the STOP state, the
AS8510 can be programmed and by giving start command it starts working following the state machine.
ADC
t
Tconv
Start SBM2
Ta sec.
IDD
I
Tconv
I
MCU
|I| > I Threshold
INT
Channel
DATA Register
DATA – A1
DATA – A0
DATA – A2
DATA – A3
TINT
相關PDF資料
PDF描述
VI-BTF-IX-F3 CONVERTER MOD DC/DC 72V 75W
VE-J3N-IZ-B1 CONVERTER MOD DC/DC 18.5V 25W
NCV1124DR2G IC SENSOR DUAL VAR-RELUCT 8-SOIC
MS27508E24B1PB CONN RCPT 128POS BOX MNT W/PINS
D38999/26WJ4PN CONN PLUG 56POS STRAIGHT W/PINS
相關代理商/技術參數
參數描述
AS8510-COPPER-SHUNT 功能描述:DEMO BOARD FOR AS8510 制造商:ams 系列:- 零件狀態:在售 主要用途:接口，數據捕捉 嵌入式:- 使用的 IC/零件:AS8510 主要屬性:- 輔助屬性:圖形用戶界面 所含物品:板 標準包裝:1
AS8510-DB 制造商:ams 功能描述:AS8510 Demo Board
AS8515-ZMFM 制造商:ams 功能描述:IC BATTERY MANAGEMENT 制造商:ams 功能描述:Data Acquisition System w/ Power Management and LIN Transceiver - MLF-32 制造商:ams 功能描述:T&R / MLF 32 (5x5)
AS8515-ZMFP 制造商:ams 功能描述:IC INTERFACE TRANSCEIVER 制造商:ams 功能描述:T&R / MLF 32 (5x5)
AS8520 制造商:AMSCO 制造商全稱:austriamicrosystems AG 功能描述:LIN Transceiver with Voltage Regulator, Attenuator, Relay Drivers, MCU Interface for Automotive Applications
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*