參數資料
型號: DS26503L+
廠商: Maxim Integrated Products
文件頁數: 5/122頁
文件大?。?/td> 0K
描述: IC T1/E1/J1 BITS ELEMENT 64-LQFP
產品培訓模塊: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝: 160
類型: BITS 元件,多路復用器
PLL:
主要目的: T1/E1
輸入: 時鐘
輸出: 時鐘
電路數: 1
比率 - 輸入:輸出: 2:2
差分 - 輸入:輸出: 無/無
頻率 - 最大: 6.312MHz
電源電壓: 3.135 V ~ 3.465 V
工作溫度: 0°C ~ 70°C
安裝類型: 表面貼裝
封裝/外殼: 64-LQFP
供應商設備封裝: 64-LQFP(10x10)
包裝: 托盤
產品目錄頁面: 1430 (CN2011-ZH PDF)
DS26503 T1/E1/J1 BITS Element
IDCODE
When the IDCODE instruction is latched into the parallel instruction register, the identification test
register is selected. The device identification code will be loaded into the identification register on the
rising edge of JTCLK following entry into the capture-DR state. Shift-DR can be used to shift the
identification code out serially via JTDO. During test-logic-reset, the identification code is forced into the
instruction register’s parallel output. The ID code will always have a 1 in the LSB position. The next 11
bits identify the manufacturer’s JEDEC number and number of continuation bytes followed by 16 bits for
the device and 4 bits for the version
. Table 16-3 lists the device ID codes.
Table 16-2. ID Code Structure
MSB
LSB
Version
Contact Factory
Device ID
JEDEC
1
4 bits
16 bits
00010100001
1
Table 16-3. Device ID Codes
DEVICE
16-BIT ID
DS26503
0035h
16.2 Test Registers
IEEE 1149.1 requires a minimum of two test registers: the bypass register and the boundary scan register.
An optional test register has been included with the DS26503 design. This test register is the
identification register and is used with the IDCODE instruction and the test-logic-reset state of the TAP
controller.
16.2.1 Boundary Scan Register
This register contains both a shift register path and a latched parallel output for all control cells and
digital I/O cells and is n bits in length. See for all the cell bit locations and definitions.
16.2.2 Bypass Register
This is a single 1-bit shift register used with the BYPASS, CLAMP, and HIGHZ instructions that
provides a short path between JTDI and JTDO.
16.2.3 Identification Register
The identification register contains a 32-bit shift register and a 32-bit latched parallel output. This register
is selected during the IDCODE instruction and when the TAP controller is in the test-logic-reset state.
102 of 122
相關PDF資料
PDF描述
V375C48M150BF CONVERTER MOD DC/DC 48V 150W
CS3106A-18-57P CONN PLUG 6POS STRAIGHT W/PINS
ADN2812ACPZ IC CLOCK/DATA RECOVERY 32LFCSP
MS27467T25B19PA CONN PLUG 19POS STRAIGHT W/PINS
ADN2817ACPZ IC CLOCK/DATA RECOVERY 32-LFCSP
相關代理商/技術參數
參數描述
DS26503L+ 功能描述:計時器和支持產品 E1-T1-J1 Bits Element RoHS:否 制造商:Micrel 類型:Standard 封裝 / 箱體:SOT-23 內部定時器數量:1 電源電壓-最大:18 V 電源電壓-最小:2.7 V 最大功率耗散: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Reel
DS26503LN 功能描述:計時器和支持產品 E1-T1-J1 Bits Element RoHS:否 制造商:Micrel 類型:Standard 封裝 / 箱體:SOT-23 內部定時器數量:1 電源電壓-最大:18 V 電源電壓-最小:2.7 V 最大功率耗散: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Reel
DS26503LN+ 功能描述:計時器和支持產品 E1-T1-J1 Bits Element RoHS:否 制造商:Micrel 類型:Standard 封裝 / 箱體:SOT-23 內部定時器數量:1 電源電壓-最大:18 V 電源電壓-最小:2.7 V 最大功率耗散: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Reel
DS26504 制造商:Maxim Integrated Products 功能描述:T1/E1/J1 ENH BITS ELEMENT LQFP - Trays
DS26504_06 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:T1/E1/J1/64KCC BITS Element