- 您現在的位置：買賣IC網 > PDF目錄3842 > DSPIC30F3013-20I/SP (Microchip Technology)IC DSPIC MCU/DSP 24K 28DIP PDF資料下載
參數資料
| 型號： | DSPIC30F3013-20I/SP |
| 廠商： | Microchip Technology |
| 文件頁數： | 25/161頁 |
| 文件大小： | 0K |
| 描述： | IC DSPIC MCU/DSP 24K 28DIP |
| 產品培訓模塊： | Serial Communications using dsPIC30F I2C Serial Communications using dsPIC30F SPI Serial Communications using dsPIC30F UART dsPIC30F 12 bit ADC - Part 2 dsPIC30F Addressing Modes - Part 1 dsPIC30F Architecture - Part 1 dsPIC30F DSP Engine & ALU dsPIC30F Interrupts dsPIC30F Motor Control PWM dsPIC Timers Asynchronous Stimulus dsPIC30F Addressing Modes - Part 2 dsPIC30F Architecture - Part 2 dsPIC30F 12-bit ADC Part 1 |
| 標準包裝： | 15 |
| 系列： | dsPIC™ 30F |
| 核心處理器： | dsPIC |
| 芯體尺寸： | 16-位 |
| 速度： | 20 MIPS |
| 連通性： | I²C，SPI，UART/USART |
| 外圍設備： | 欠壓檢測/復位，POR，PWM，WDT |
| 輸入/輸出數： | 20 |
| 程序存儲器容量： | 24KB（8K x 24） |
| 程序存儲器類型： | 閃存 |
| EEPROM 大?。?/td> | 1K x 8 |
| RAM 容量： | 2K x 8 |
| 電壓 - 電源 (Vcc/Vdd)： | 2.5 V ~ 5.5 V |
| 數據轉換器： | A/D 10x12b |
| 振蕩器型： | 內部 |
| 工作溫度： | -40°C ~ 85°C |
| 封裝/外殼： | 28-DIP（0.300"，7.62mm） |
| 包裝： | 管件 |
| 其它名稱： | DSPIC30F301320ISP |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁當前第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁第122頁第123頁第124頁第125頁第126頁第127頁第128頁第129頁第130頁第131頁第132頁第133頁第134頁第135頁第136頁第137頁第138頁第139頁第140頁第141頁第142頁第143頁第144頁第145頁第146頁第147頁第148頁第149頁第150頁第151頁第152頁第153頁第154頁第155頁第156頁第157頁第158頁第159頁第160頁第161頁
PIC18F46J11 FAMILY
DS39932D-page 150
2011 Microchip Technology Inc.
10.7
Peripheral Pin Select (PPS)
A major challenge in general purpose devices is provid-
ing the largest possible set of peripheral features while
minimizing the conflict of features on I/O pins. The
challenge is even greater on low pin count devices
similar to the PIC18F46J11 family. In an application
that needs to use more than one peripheral multiplexed
on single pin, inconvenient workarounds in application
code or a complete redesign may be the only option.
The Peripheral Pin Select (PPS) feature provides an
alternative to these choices by enabling the user’s
peripheral set selection and their placement on a wide
range of I/O pins. By increasing the pinout options
available on a particular device, users can better tailor
the microcontroller to their entire application, rather than
trimming the application to fit the device.
The PPS feature operates over a fixed subset of digital
I/O pins. Users may independently map the input and/
or output of any one of the many digital peripherals to
any one of these I/O pins. PPS is performed in software
and generally does not require the device to be
reprogrammed. Hardware safeguards are included that
prevent accidental or spurious changes to the
peripheral mapping once it has been established.
10.7.1
AVAILABLE PINS
The PPS feature is used with a range of up to 22 pins;
the number of available pins is dependent on the
particular device and its pin count. Pins that support the
PPS feature include the designation “RPn” in their full
pin designation, where “RP” designates a remappable
peripheral and “n” is the remappable pin number. See
Table 1-2 for pinout options in each package offering.
10.7.2
AVAILABLE PERIPHERALS
The peripherals managed by the PPS are all digital
only peripherals. These include general serial commu-
nications (UART and SPI), general purpose timer clock
inputs, timer-related peripherals (input capture and
output compare) and external interrupt inputs. Also
included are the outputs of the comparator module,
since these are discrete digital signals.
The PPS module is not applied to I2C, change notifica-
tion inputs, RTCC alarm outputs or peripherals with
analog inputs. Additionally, the MSSP1 and EUSART1
modules are not routed through the PPS module.
A key difference between pin select and non-pin select
peripherals is that pin select peripherals are not asso-
ciated with a default I/O pin. The peripheral must
always be assigned to a specific I/O pin before it can be
used. In contrast, non PPS peripherals are always
available on a default pin, assuming that the peripheral
is active and not conflicting with another peripheral.
10.7.2.1
Peripheral Pin Select Function
Priority
When a pin selectable peripheral is active on a given I/O
pin, it takes priority over all other digital I/O and digital
communication peripherals associated with the pin.
Priority is given regardless of the type of peripheral that
is mapped. Pin select peripherals never take priority
over any analog functions associated with the pin.
10.7.3
CONTROLLING PERIPHERAL PIN
SELECT
PPS features are controlled through two sets of Special
Function Registers (SFRs): one to map peripheral
inputs and the other to map outputs. Because they are
separately controlled, a particular peripheral’s input
and output (if the peripheral has both) can be placed on
any selectable function pin without constraint.
The association of a peripheral to a peripheral selectable
pin is handled in two different ways, depending on
whether an input or an output is being mapped.
相關PDF資料 |
PDF描述 |
|---|---|
| PIC18LF6390-I/PT | IC PIC MCU FLASH 4KX16 64TQFP |
| DSPIC30F3013-30I/SP | IC DSPIC MCU/DSP 24K 28DIP |
| DSPIC33FJ32MC202-E/SO | IC DSPIC MCU/DSP 32K 28SOIC |
| 52745-0896 | CONN FFC 8POS .5MM R/A ZIF SMD |
| 52745-0496 | CONN FFC 4POS .5MM R/A ZIF SMD |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DSPIC30F3013-30I/ML | 功能描述:數字信號處理器和控制器 - DSP, DSC Sensor RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT |
| DSPIC30F3013-30I/SO | 功能描述:數字信號處理器和控制器 - DSP, DSC Sensor RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT |
| DSPIC30F3013-30I/SO | 制造商:Microchip Technology Inc 功能描述:IC DSC 16BIT 24KB 40MHZ 5.5V SOIC-28 |
| DSPIC30F3013-30I/SP | 功能描述:數字信號處理器和控制器 - DSP, DSC Sensor RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT |
| DSPIC30F3013-30I/SP | 制造商:Microchip Technology Inc 功能描述:16-Bit Digital Signal Controller |
發布緊急采購，3分鐘左右您將得到回復。