ADG884
Data Sheet
Rev. D | Page 6 of 16
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 4.
Parameter
Rating
VDD to GND
0.3 V to +6 V
Analog Inputs,
1 Digital Inputs
0.3 V to VDD + 0.3 V or 30 mA
(whichever occurs first)
Peak Current, S or D
600 mA (pulsed at 1 ms, 10%
duty cycle maximum)
Continuous Current, S or D
400 mA
Operating Temperature Range
40°C to +85°C
Storage Temperature Range
65°C to +150°C
Junction Temperature
150°C
10-Lead MSOP, Thermal Impedance
θJA
206°C/W
θJC
44°C/W
10-Ball WLCSP (4-Layer Board),
Thermal Impedance
θJA
120°C/W
10-Lead LFCSP_WD (4-Layer Board),
Thermal Impedance
θJA
76°C/W
θJC
13.5°C/W
Reflow Soldering (Pb-Free)
Peak Temperature
260(+ 0 or 5)°C
Time at Peak Temperature
10 sec to 40 sec
1 Overvoltages at IN, S, or D pins are clamped by internal diodes. Current
should be limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating can be applied at any
one time.
ESD CAUTION