4-12
Intel
Integrated RAID Controller GSU31
User
’
s Manual
Rev 1.0
Using the Storage Console
4.3
Configuring RAID Volumes Using the
Intel
Integrated RAID Storage Console
4.3.1
Getting Started
Before using the Intel Integrated RAID browser software, do the initial setup and installation of
this product. See
Section 2.5,
“
GSU31 Setup and Installation
”
on page 2-22
for complete
installation instructions.
If you intend to boot the operating system from a RAID volume, you must first create
a RAID
volume by using the RAID Configuration Utility. Refer to
Section 2.3.3,
“
Creating a RAID
Volume in RAID Configuration Utility
”
on page 2-6
for information on creating this initial RAID
volume.
Configuration of the Intel Integrated RAID Storage Console is an HTML-based application which
utilizes the browser installed on your operating system. Storage Console can be used to create and
modify RAID volumes, set the migration rate, add global hot spares and monitor RAID volume
status.
Note:
Use the confirmation and cancellation buttons in place of the Back, Forward, and Refresh buttons
on the HTML browser.
4.3.2
Launching the Intel
Integrated RAID Storage Console for
Local Administration
4.3.2.1
Microsoft Windows NT and Windows 2000
Launch your web browser by clicking on the local Storage Console icon. If this icon is missing,
you may execute the Storage Console by entering
iop://localhost/0/8/0
in your HTML browser.
4.3.2.2
Novell NetWare
Intel Integrated RAID software includes a text based browser to manage and configure your Intel
Integrated RAID subsystem. Follow the procedure below to launch Storage Console.
1. At the NetWare Graphical Console screen, hit
Ctrl Esc
to go to the Text Console.
2. Select I
2
O
Configuration Screen
. Hit
Enter
.
3. In the I
2
O Configuration Manager screen
select
Configure IOPs.
Hit
Enter
.
4. In the I
2
O
System IOP List
screen, select the IOP ID# of the card you are configuring and hit
Enter
.
5. In the I
2
O
IOP Configuration Options
screen, select the
IO Processor Main Page
link and hit
Enter
.
6. Select
RAID Storage Console
and hit
Enter
. Follow the prompts to launch Storage Console.