參數資料
型號: HFBR-5208M
英文描述: 1 x 9 Fiber Optic Transceivers for 622 Mb/s ATM/SONET/SDH Applications(應用于622 Mb/s ATM/SONET/SDH 的1 x 9光纖收發器)
中文描述: 1 × 9光纖收發器為622字節/秒的ATM / SONET / SDH應用(應用于622 Mb / s的ATM機/的SONET / SDH的1 × 9光纖收發器)
文件頁數: 13/20頁
文件大?。?/td> 656K
代理商: HFBR-5208M
13
HFBR-5208M Family, 1300 nm LED
Receiver Optical Characteristics
(T
A
= 0
°
C to +70
°
C, V
CC
= 4.75 to 5.25 V. Typical @+25
°
C, 5 V)
Notes:
10. This specification is intended to indicate the performance of the receiver section of the transceiver when the input power ranges
from the minimum level (with a window time-width) to the maximum level. Over this range the receiver is guaranteed to provide
output data with a Bit Error Ratio (BER) better than or equal to 1 x 10
-10
At the Beginning of Life (BOL)
Over the specified operating temperature and voltage ranges
Input is at 622.08 Mbd, 2
23
-1 PRBS data pattern with 72
1
s and 72
0
s inserted per the CCITT (now ITU-T) recommendation
G.958 Appendix 1.
Receiver worst-case output data eye-opening (window time-width) is measured by applying worst-case input systematic (SJ) and
random jitter (RJ). The worst-case maximum input SJ = 0.5 ns peak-to-peak and the RJ = 0.15 ns peak-to-peak per ANSI T1.646a
standard. Since the input (transmitter) random jitter contribution is very small and difficult to produce exactly, only the maximum
systematic jitter is produced and used for testing the receiver. The corresponding receiver test window time-width must meet the
requirement of 0.31 ns or larger. This worst-case test window time-width results from the following jitter equation:
Minimum Test Window Time-Width = Baud Interval - Tx SJ max. - Rx SJ max. - Rx RJ max.
Respectively, Minimum Test Window Time-Width = 1.608 ns - 0.50 ns - 0.30 ns - 0.48 ns = 0.328 ns.
This is a test method that is within practical test error of the worst-case 0.31 ns limit.
Input optical rise and fall times (10% - 90%) are 0.7 ns and 0.9 ns respectively.
Transmitter operating with a 622.08 MBd, 311.04 MHz square wave input signal to simulate any cross talk present between the
transmitter and receiver sections of the transceiver.
Parameter
Symbol
Minimum Typical Maximum
-29.0
Unit
dBm avg.
Notes
10
Fig 2
10
Fig 2,3
10
Minimum Input Optical Power at window edge P
IN
MIN (W)
-26
Minimum Input Optical Power at eye center
P
IN
MIN (C)
-30.5
dBm avg.
Input Optical Power Maximum
Input Operating Wavelength
Systematic Jitter Contributed by the Receiver
Random Jitter Contributed by the Receiver
Signal Detect - Asserted
Signal Detect - Deasserted
Signal Detect - Hysteresis
P
IN
MAX
-14
1270
-11
dBm avg.
nm
ns p-p
ns p-p
dBm avg.
dBm avg.
dB
l
SJ
RJ
P
A
P
D
1380
0.30
0.48
-28
0.1
0.25
-30.5
-33.7
3.2
P
D
+1.0 dB
-45
1.0
P
A
- P
D
5
相關PDF資料
PDF描述
HFCT-5208M 1 x 9 Fiber Optic Transceivers for 622 Mb/s ATM/SONET/SDH Applications(應用于622 Mb/s ATM/SONET/SDH 的1 x 9光纖收發器)
HFBR-5208 1300 nm LED Transceiver for ATM, SONET/SDH 622 Mb/s and General Purpose 155 - 650 Mb/s(應用于ATM, SONET/SDH 622 Mb/s和 通用155 - 650 Mb/s的1300 nm LED收發器)
HFBR-5303 850 nm VCSEL 1x9 Transceiver(850 nm VCSEL 1x9 收發器)
HFBR-53D3 850 nm VCSEL 1x9 Transceiver(850 nm VCSEL 1x9 收發器)
HFBR-53D5 850 nm VCSEL 1x9 Transceiver(850 nm VCSEL 1x9 收發器)
相關代理商/技術參數
參數描述
HFBR-5208MZ 功能描述:光纖發射器、接收器、收發器 1x9 622Mb/s SR Txcvr Metal RoHS RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
HFBR-5208XX 制造商:AGILENT 制造商全稱:AGILENT 功能描述:Agilent HFBR/HFCT-5208M 1 x 9 Fiber Optic Transceivers for 622 Mb/s ATM/SONET/SDH Applications
HFBR-5208Z 功能描述:光纖發射器、接收器、收發器 622Mbps ATM MMF 1x9 Trxcvr RoHS RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
HFBR-5301 制造商:HP 制造商全稱:Agilent(Hewlett-Packard) 功能描述:Fibre Channel 133 MBd and Fibre Channel 133 MBd and Cost 1x9 Package Style
HFBR-5301AZT 制造商:Avago Technologies 功能描述:FIBRE CHANNEL 133 MBD TRANSCEIVER 1X9 - Tape and Reel