參數資料
型號: HFBR-5208M
英文描述: 1 x 9 Fiber Optic Transceivers for 622 Mb/s ATM/SONET/SDH Applications(應用于622 Mb/s ATM/SONET/SDH 的1 x 9光纖收發器)
中文描述: 1 × 9光纖收發器為622字節/秒的ATM / SONET / SDH應用(應用于622 Mb / s的ATM機/的SONET / SDH的1 × 9光纖收發器)
文件頁數: 9/20頁
文件大?。?/td> 656K
代理商: HFBR-5208M
9
Table 1. Pinout Table
Pin
Symbol
Mounting Studs
1 = V
EER
2 = RD
3 = RD
4 = SD
5 = V
CCR
6 = V
CCT
7 = TD
8 = TD
9 = V
EET
N/C
N/C
N/C = NO INTERNAL CONNECTION
(MOUNTING POSTS) - CONNECT TO
CHASSIS GROUND OR LEAVE
FLOATING, DO NOT CONNECT TO
SIGNAL GROUND.
TOP VIEW
Functional Description
The mounting studs are provided for transceiver mechanical attachment to the circuit
boards, they are embedded in the metalized plastic housing and are not connected to
the transceiver internal circuit. They should be soldered into plated-through holes on
the printed circuit board and not connected to signal ground.
Receiver Signal Ground
Directly connect this pin to receiver signal ground plane. Receiver V
EER
and transmitter
V
EET
can connect to a common circuit board ground plane.
1
V
EER
2
RD+
Receiver Data Out
Terminate this high-speed, differential, PECL output with standard PECL techniques at
the follow-on device input pin.
Receiver Data Out Bar
Terminate this high-speed, differential, PECL output with standard PECL techniques at
the follow-on device input pin.
Signal Detect
Normal input optical signal levels to the receiver result in a logic "1" output (V
OH
).
Low input optical signal levels to the receiver result in a fault condition indication
shown by a logic "0" output (V
OL
).
If Signal Detect output is not used, leave it open-circuited.
3
RD-
4
SD
This Signal Detect output can be used to drive a PECL input on an upstream circuit,
such as, Signal Detect input or Loss of Signal-bar.
Receiver Power Supply
Provide +5 V dc via the recommended receiver V
CCR
power supply filter circuit.
Locate the power supply filter circuit as close as possible to the V
CCR
pin.
5
V
CCR
6
V
CCT
Transmitter Power Supply
Provide +5 V dc via the recommended transmitter V
CCT
power supply filter circuit.
Locate the power supply filter circuit as close as possible to the V
CCT
pin.
7
TD-
Transmitter Data In Bar
Terminate this high-speed, differential, Transmitter Data input with standard PECL
techniques at the transmitter input pin.
Transmitter Data In
Terminate this high-speed, differential, Transmitter Data input with standard PECL
techniques at the transmitter input pin.
Transmitter Signal Ground
Directly connect this pin to the transmitter signal ground plane. Transmitter V
EET
and
receiver V
EER
can connect to a common circuit board ground plane.
8
TD+
9
V
EET
相關PDF資料
PDF描述
HFCT-5208M 1 x 9 Fiber Optic Transceivers for 622 Mb/s ATM/SONET/SDH Applications(應用于622 Mb/s ATM/SONET/SDH 的1 x 9光纖收發器)
HFBR-5208 1300 nm LED Transceiver for ATM, SONET/SDH 622 Mb/s and General Purpose 155 - 650 Mb/s(應用于ATM, SONET/SDH 622 Mb/s和 通用155 - 650 Mb/s的1300 nm LED收發器)
HFBR-5303 850 nm VCSEL 1x9 Transceiver(850 nm VCSEL 1x9 收發器)
HFBR-53D3 850 nm VCSEL 1x9 Transceiver(850 nm VCSEL 1x9 收發器)
HFBR-53D5 850 nm VCSEL 1x9 Transceiver(850 nm VCSEL 1x9 收發器)
相關代理商/技術參數
參數描述
HFBR-5208MZ 功能描述:光纖發射器、接收器、收發器 1x9 622Mb/s SR Txcvr Metal RoHS RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
HFBR-5208XX 制造商:AGILENT 制造商全稱:AGILENT 功能描述:Agilent HFBR/HFCT-5208M 1 x 9 Fiber Optic Transceivers for 622 Mb/s ATM/SONET/SDH Applications
HFBR-5208Z 功能描述:光纖發射器、接收器、收發器 622Mbps ATM MMF 1x9 Trxcvr RoHS RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
HFBR-5301 制造商:HP 制造商全稱:Agilent(Hewlett-Packard) 功能描述:Fibre Channel 133 MBd and Fibre Channel 133 MBd and Cost 1x9 Package Style
HFBR-5301AZT 制造商:Avago Technologies 功能描述:FIBRE CHANNEL 133 MBD TRANSCEIVER 1X9 - Tape and Reel