參數資料
型號: ISP1582BS,557
廠商: NXP SEMICONDUCTORS
元件分類: 總線控制器
英文描述: UNIVERSAL SERIAL BUS CONTROLLER, PQCC56
封裝: 8 X 8 MM, 0.85 MM PITCH, PLASTIC, MO-220, SOT-684-1, HVQFN-56
文件頁數: 24/69頁
文件大小: 365K
代理商: ISP1582BS,557
ISP1582_7
NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 07 — 22 September 2008
29 of 68
NXP Semiconductors
ISP1582
Hi-Speed USB peripheral controller
8.3 Data ow registers
8.3.1 Endpoint Index register (address: 2Ch)
The Endpoint Index register selects a target endpoint for register access by the
microcontroller. The register consists of 1 byte, and the bit allocation is shown in Table 28.
The following registers are indexed:
Buffer length
Buffer status
Control function
Data port
Endpoint MaxPacketSize
Endpoint type
For example, to access the OUT data buffer of endpoint 1 using the Data Port register, the
Endpoint Index register must be written rst with 02h.
Remark: The Endpoint Index register and the DMA Endpoint register must not point to the
same endpoint, irrespective of IN and OUT.
Remark: The delay time from the Write Endpoint Index register to the Read Data Port
register must be at least 190 ns.
Remark: The delay time from the Write Endpoint Index register to the Write Data Port
register must be at least 100 ns.
7
IEVBUS
Logic 1 enables interrupt for VBUS sensing.
6
IEDMA
Logic 1 enables interrupt on the DMA Interrupt Reason register change
detection.
5
IEHS_STA
Logic 1 enables interrupt on detection of a high-speed status change.
4
IERESM
Logic 1 enables interrupt on detection of a resume state.
3
IESUSP
Logic 1 enables interrupt on detection of a suspend state.
2
IEPSOF
Logic 1 enables interrupt on detection of a pseudo SOF.
1
IESOF
Logic 1 enables interrupt on detection of an SOF.
0
IEBRST
Logic 1 enables interrupt on detection of a bus reset.
Table 27.
Interrupt Enable register: bit description …continued
Bit
Symbol
Description
Table 28.
Endpoint Index register: bit allocation
Bit
7
6
5
4
3
2
1
0
Symbol
reserved
EP0SETUP
ENDPIDX[3:0]
DIR
Reset
-
10
0000
Bus reset
-
unchanged
0
0000
Access
R/W
相關PDF資料
PDF描述
ISP1583ET1,118 UNIVERSAL SERIAL BUS CONTROLLER, PBGA64
ISP1583BS,551 UNIVERSAL SERIAL BUS CONTROLLER, PQCC64
ISP1583ET2 UNIVERSAL SERIAL BUS CONTROLLER, PBGA64
ISP1761ET,518 UNIVERSAL SERIAL BUS CONTROLLER, PBGA128
ISP1761BE,518 UNIVERSAL SERIAL BUS CONTROLLER, PQFP128
相關代理商/技術參數
參數描述
ISP1582BSGA 功能描述:IC UBS CTRL HI-SPEED 56HVQFN RoHS:是 類別:集成電路 (IC) >> 接口 - 專用 系列:- 標準包裝:3,000 系列:- 應用:PDA,便攜式音頻/視頻,智能電話 接口:I²C,2 線串口 電源電壓:1.65 V ~ 3.6 V 封裝/外殼:24-WQFN 裸露焊盤 供應商設備封裝:24-QFN 裸露焊盤(4x4) 包裝:帶卷 (TR) 安裝類型:表面貼裝 產品目錄頁面:1015 (CN2011-ZH PDF) 其它名稱:296-25223-2
ISP1582BS-S 功能描述:USB 接口集成電路 HI-SPEED USB2 DEVICE RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1582BS-T 功能描述:USB 接口集成電路 USB PERIPH CNTRLR RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1582BSUM 功能描述:IC USB PERIPH CONTROLLER 56HVQFN RoHS:是 類別:集成電路 (IC) >> 接口 - 專用 系列:- 標準包裝:3,000 系列:- 應用:PDA,便攜式音頻/視頻,智能電話 接口:I²C,2 線串口 電源電壓:1.65 V ~ 3.6 V 封裝/外殼:24-WQFN 裸露焊盤 供應商設備封裝:24-QFN 裸露焊盤(4x4) 包裝:帶卷 (TR) 安裝類型:表面貼裝 產品目錄頁面:1015 (CN2011-ZH PDF) 其它名稱:296-25223-2
ISP1583 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Hi-Speed Universal Serial Bus peripheral controller