參數資料
型號： M25P40
廠商： 意法半導體
元件分類： DRAM
英文描述： 4 Mbit Uniform Sector, Serial Flash Memory
中文描述： 4兆位統一部門，串行閃存
文件頁數： 17/51頁
文件大?。?/td> 398K
代理商： M25P40
M25P40
Instructions
17/51
6
Instructions
All instructions, addresses and data are shifted in and out of the device, most significant bit
first.
Serial Data Input (D) is sampled on the first rising edge of Serial Clock (C) after Chip Select
(S) is driven Low. Then, the one-byte instruction code must be shifted in to the device, most
significant bit first, on Serial Data Input (D), each bit being latched on the rising edges of
Serial Clock (C).
The instruction set is listed in
Table 4
.
Every instruction sequence starts with a one-byte instruction code. Depending on the
instruction, this might be followed by address bytes, or by data bytes, or by both or none.
Chip Select (S) must be driven High after the last bit of the instruction sequence has been
shifted in.
In the case of a Read Data Bytes (READ), Read Data Bytes at Higher Speed (Fast_Read),
Read Identification (RDID), Read Status Register (RDSR) or Release from Deep Power-
down, and Read Electronic Signature (RES) instruction, the shifted-in instruction sequence
is followed by a data-out sequence. Chip Select (S) can be driven High after any bit of the
data-out sequence is being shifted out.
In the case of a Page Program (PP), Sector Erase (SE), Bulk Erase (BE), Write Status
Register (WRSR), Write Enable (WREN), Write Disable (WRDI) or Deep Power-down (DP)
instruction, Chip Select (S) must be driven High exactly at a byte boundary, otherwise the
instruction is rejected, and is not executed. That is, Chip Select (S) must driven High when
the number of clock pulses after Chip Select (S) being driven Low is an exact multiple of
eight.
All attempts to access the memory array during a Write Status Register cycle, Program
cycle or Erase cycle are ignored, and the internal Write Status Register cycle, Program
cycle or Erase cycle continues unaffected.
相關PDF資料
PDF描述
M25PE10-VMN6G 4 Mbit Uniform Sector, Serial Flash Memory
M25PE20-VMP6TP 4 Mbit Uniform Sector, Serial Flash Memory
M25PE10-VMN6P 4 Mbit Uniform Sector, Serial Flash Memory
M25PE10-VMP6G 4 Mbit Uniform Sector, Serial Flash Memory
M25PE10-VMP6P 4 Mbit Uniform Sector, Serial Flash Memory
相關代理商/技術參數
參數描述
M25P40_07 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:4 Mbit, low voltage, serial Flash memory with 50 MHz SPI bus interface
M25P40_12 制造商:MICRON 制造商全稱:Micron Technology 功能描述:Micron M25P40 Serial Flash Embedded Memory
M25P40-VMB3TPB 制造商:Micron Technology Inc 功能描述:AUTOMOTIVE - Tape and Reel
M25P40-VMB3TPB TR 制造商:Micron Technology Inc 功能描述:IC FLASH 4MBIT 75MHZ 8UFDFPN
M25P40-VMB6TPB 制造商:Micron Technology Inc 功能描述:4MBIT SPI NOR FLASH 制造商:Micron Technology Inc 功能描述:AUTOMOTIVE FLASH - Cut TR (SOS) 制造商:Micron Technology Inc 功能描述:AUTOMOTIVE FLASH - Tape and Reel 制造商:Micron Technology Inc 功能描述:NOR Flash Serial-SPI 2.5V/3.3V 4Mbit 512K x 8bit 8ns 8-Pin UFDFPN EP T/R
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*