參數資料
型號： M30220FCGP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP144
封裝： 20 X 20 MM, 0.50 MM PITCH, PLASTIC, LQFP-144
文件頁數： 11/161頁
文件大小： 0K
代理商： M30220FCGP
100
EPSON
S1C88832/88862 TECHNICAL MANUAL
5 PERIPHERAL CIRCUITS AND THEIR OPERATION (LCD Controller)
5.11.6 Display control
The display status of the built-in LCD driver and
the contrast adjustment can be controlled with the
built-in LCD controller. The LCD display status can
be selected by display control registers LCDC0 and
LCDC1. Setting the value and display status are
shown in Table 5.11.6.1.
Table 5.11.6.1 LCD display control
All the dots in the LCD display can be turned on or
off directly by the drive waveform output from the
LCD driver, and data in the display memory is not
changed. Also, since the common terminal at this
time is set to static drive when all the dots are on
and is set to dynamic drive when they are off, this
function can be used as follows:
(1) Since all dots on is binary output (VC5 and VSS)
with static drive, the common/segment termi-
nal can be used as a monitor terminal for the
OSC1 oscillation frequency adjustment.
(2) Since all dots off is dynamic drive, you can
brink the entire LCD display without changing
display memory data.
LCDC1
LCDC0
LCD display
1
0
1
0
1
0
All LCDs lit (Static)
All LCDs out (Dynamic)
Normal display
Drive OFF
LC3
LC0
Contrast
1
:
0
1
0
1
:
0
1
0
Dark
Light
LC1
1
0
:
1
0
LC2
1
:
0
↑
↓
Selecting LCD drive OFF turns the LCD drive
power circuit OFF and all the VC1–VC5 terminals go
to VSS level. However, if external power supply has
been selected by the mask option, the VC1–VC5 shift
to floating status when drive is turned OFF.
Furthermore, when the SLP instruction is executed,
registers LCDC0 and LCDC1 are automatically
reset to "0" (set to drive off) by hardware.
The LCD contrast can be adjusted in 16 stages. This
adjustment is done by the contrast adjustment
register LC0–LC3, and the setting values corre-
spond to the contrast as shown in Table 5.11.6.2.
However, if external power supply has been
selected by the mask option, the contrast adjust-
ment register LC0–LC3 is ineffective and contrast
adjustment cannot be done.
Table 5.11.6.2 LCD contrast adjustment
Note: Fixing the LCD contrast is not recommended.
A contrast adjustment function should be
included in the software.
相關PDF資料
PDF描述
M30220MA-XXXGP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP144
M30220MA-XXXRP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP144
M30220MA-XXXRP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP144
M30220MA-XXXGP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP144
M30220FCGP 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP144
相關代理商/技術參數
參數描述
M30220FCGP#D3 制造商:Renesas Electronics Corporation 功能描述:
M30220FCRP 制造商:Renesas Electronics Corporation 功能描述:M16C 128K/10K, 10MHZ,A-D,D-A,WDT/LCD DR - Trays
M30220M8-XXXGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30220M8-XXXRP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30220MA 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*