參數資料
型號： M38259EFFS
元件分類： 微控制器/微處理器
英文描述： 8-BIT, UVPROM, 4 MHz, MICROCONTROLLER, CQCC100
封裝： CERAMIC, LCC-100
文件頁數： 29/73頁
文件大?。?/td> 1323K
代理商： M38259EFFS
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
3825 Group
32
A-D CONVERTER
The functional blocks of the A-D converter are described below.
[A-D Conversion Register (AD)] 003516
The A-D conversion register is a read-only register that contains
the result of an A-D conversion. When reading this register during
an A-D conversion, the previous conversion result is read.
[A-D Control Register (ADCON)] 003416
The A-D control register controls the A-D conversion process. Bits
0 to 2 of this register select specific analog input pins. Bit 3 signals
the completion of an A-D conversion. The value of this bit remains
at “0” during an A-D conversion, then changes to “1” when the A-
D conversion is completed. Writing “0” to this bit starts the A-D
conversion. Bit 4 controls the transistor which breaks the through
current of the resistor ladder. When bit 5, which is the AD external
trigger valid bit, is set to “1”, this bit enables A-D conversion even
by a falling edge of an ADT input. Set ports which share with ADT
pins to input when using an A-D external trigger.
Comparison Voltage Generator
The comparison voltage generator divides the voltage between
AVSS and VREF by 256, and outputs the divided voltages.
Channel Selector
The channel selector selects one of the input ports P67/AN7–P60/
AN0.
Comparator and Control Circuit
The comparator and control circuit compare an analog input volt-
age with the comparison voltage and store the result in the A-D
conversion register. When an A-D conversion is completed, the
control circuit sets the AD conversion completion bit and the AD
interrupt request bit to “1”.
Note that the comparator is constructed linked to a capacitor, so
set f(XIN) to at least 500kHz during A-D conversion.
Use the clock divided from the main clock XIN as the internal clock
φ.
Fig. 29 A-D converter block diagram
Fig. 28 Structure of A-D control register
A-D control register
(ADCON : address 003416)
AD conversion completion bit
0 : Conversion in progress
1 : Conversion completed
Analog input pin selection bits
0 0 0 : P60/AN0
0 0 1 : P61/AN1
0 1 0 : P62/AN2
0 1 1 : P63/AN3
1 0 0 : P64/AN4
1 0 1 : P65/AN5
1 1 0 : P66/AN6
1 1 1 : P67/AN7
VREF input switch bit
0 : OFF
1 : ON
AD external trigger valid bit
0 : A-D external trigger invalid
1 : A-D external trigger valid
b7
b0
Interrupt source selection bit
0 : Interrupt request at A-D
conversion completed
1 : Interrupt request at ADT
input falling
Not used (returns “0” when read)
Comparator
A-D control circuit
ADT/A-D interrupt request
AVSS
VREF
P60/AN0
Data bus
A-D control register
b7
b0
A-D conversion
register
Resistor ladder
C
h
a
n
e
l
s
e
le
c
to
r
P67/AN7
P66/AN6
P65/AN5
P64/AN4
P63/AN3
P62/AN2
P61/AN1
P57/ADT
8
3
相關PDF資料
PDF描述
M38254M6DXXXFP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP100
M38258MCDXXXFP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP100
M38257M8-XXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP100
M38254M6-XXXGP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP100
M38257E8GP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
M3826 功能描述:電纜固定件和配件 LTRSCG 1000 BLACK RoHS:否 制造商:Heyco 類型:Cable Grips, Liquid Tight 材料:Nylon 顏色:Black 安裝方法:Cable 最大光束直徑:11.4 mm 抗拉強度:
M3826 BK001 制造商:Alpha Wire Company 功能描述:CBL 2COND 16AWG BLK 1000'
M3826 BK002 制造商:Alpha Wire Company 功能描述:CBL 2COND 16AWG BLK 500'
M3826 BK005 制造商:Alpha Wire Company 功能描述:CBL 2COND 16AWG BLK 100'
M3826 BK199 制造商:Alpha Wire Company 功能描述:CBL 2COND 16AWG BLK 3000=3000'
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*