![](http://datasheet.mmic.net.cn/330000/MB90F897_datasheet_16438107/MB90F897_2.png)
MB90895 Series
2
(Continued)
Instruction system best suited to controller
Wide choice of data types (bit, byte, word, and long word)
Wide choice of addressing modes (23 types)
Enhanced multiply-divide instructions and RETI instructions
Enhanced high-precision computing with 32-bit accumulator
Instruction system compatible with high-level language (C language) and multitask
Employing system stack pointer
Enhanced various pointer indirect instructions
Barrel shift instructions
Increased processing speed
4-byte instruction queue
Powerful interrupt function with 8 levels and 34 factors
Automatic data transfer function independent of CPU
Expanded intelligent I/O service function (EI
2
OS): Maximum of 16 channels
Low power consumption (standby) mode
Sleep mode (a mode that halts CPU operating clock)
Time-base timer mode (a mode that operates oscillation clock, sub clock, time-base timer and clock timer only)
Clock mode (a mode that operates sub clock and clock timer only)
Stop mode (a mode that stops oscillation clock and sub clock)
CPU blocking operation mode
Process
CMOS technology
I/O port
General-purpose input/output port (CMOS output): 34 ports (MB90F897) (including 4 high-current output
ports) (When sub clock is not used, 36 ports (MB90F897S))
Timer
Time-base timer, clock timer, watchdog timer: 1 channel
8/16-bit PPG timer: 8-bit x 4 channels, or 16-bit x 2 channels
16-bit reload timer: 2 channels
16-bit input/output timer
- 16-bit free run timer: 1 channel
- 16-bit input capture: (ICU): 4 channels
Interrupt request is issued upon latching a count value of 16-bit free run timer by detection of an edge on pin input.
CAN controller: 1 channel
Compliant with Ver 2.0A and Ver 2.0B CAN specifications
8 built-in message buffers
Transmission rate of 10 Kbps to 1 Mbps (by 16 MHz machine clock)
CAN wake-up
UART0 (SCI), UART1(SCI): 2 channel
Equipped with full-duplex double buffer
Clock-asynchronous or clock-synchronous serial transmission is available.
DTP/External interrupt: 4 channels, CAN wake-up: 1channel
Module for activation of expanded intelligent I/O service (EI
2
OS), and generation of external interrupt.
Delay interrupt generator module
Generates interrupt request for task switching.
8/10-bit A/D converter: 8 channels
Resolution is selectable between 8-bit and 10-bit.
Activation by external trigger input is allowed.
Conversion time: 6.125
μ
s (at 16-MHz machine clock, including sampling time)
Program patch function
Address matching detection for 2 address pointers.