參數資料
型號： MC68HSC05C8AP
廠商： FREESCALE SEMICONDUCTOR INC
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 4.1 MHz, MICROCONTROLLER, PDIP40
封裝： PLASTIC, DIP-40
文件頁數： 69/116頁
文件大小： 781K
代理商： MC68HSC05C8AP
Serial Communications Interface (SCI)
MC68HC05C8A MC68HCL05C8A MC68HSC05C8A Data Sheet, Rev. 5.1
56
Freescale Semiconductor
TC — Transmission Complete Bit
This clearable, read-only bit is set when the TDRE bit is set, and no data, preamble, or break character
is being transmitted. TC generates an interrupt request if the TCIE bit in SCCR2 is also set. Clear the
TC bit by reading the SCSR with TC set, and then writing to the SCDR. Reset sets the TC bit. Software
must initialize the TC bit to logic 0 to avoid an instant interrupt request when turning on the transmitter.
1 = No transmission in progress
0 = Transmission in progress
RDRF — Receive Data Register Full Bit
This clearable, read-only bit is set when the data in the receive shift register transfers to the SCI data
register. RDRF generates an interrupt request if the RIE bit in SCCR2 is also set. Clear the RDRF bit
by reading the SCSR with RDRF set, and then reading the SCDR. Reset clears the RDRF bit.
1 = Received data available in SCDR
0 = Received data not available in SCDR
IDLE — Receiver Idle Bit
This clearable, read-only bit is set when 10 or 11 consecutive logic 1s appear on the receiver input.
IDLE generates an interrupt request if the ILIE bit in SCCR2 is also set. Clear the IDLE bit by reading
the SCSR with IDLE set, and then reading the SCDR. Reset clears the IDLE bit.
1 = Receiver input idle
0 = Receiver input not idle
OR — Receiver Overrun Bit
This clearable, read-only bit is set if the SCDR is not read before the receive shift register receives the
next word. OR generates an interrupt request if the RIE bit in SCCR2 is also set. The data in the shift
register is lost, but the data already in the SCDR is not affected. Clear the OR bit by reading the SCSR
with OR set and then reading the SCDR. Reset clears the OR bit.
1 = Receiver shift register full and RDRF = 1
0 = No receiver overrun
NF — Receiver Noise Flag
This clearable, read-only bit is set when noise is detected in data received in the SCI data register.
Clear the NF bit by reading the SCSR and then reading the SCDR. Reset clears the NF bit.
1 = Noise detected in SCDR
0 = No noise detected in SCDR
FE — Receiver Framing Error Flag
This clearable, read-only flag is set when there is a logic 0 where a stop bit should be in the character
shifted into the receive shift register. If the received word causes both a framing error and an overrun
error, the OR bit is set and the FE bit is not set. Clear the FE bit by reading the SCSR, and then reading
the SCDR. Reset clears the FE bit.
1 = Framing error
0 = No framing error
相關PDF資料
PDF描述
MC9S12KG64CPV 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP112
MC9S12KG64VPV 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP112
MAC7122MPV50 32-BIT, FLASH, 50 MHz, MICROCONTROLLER, PQFP112
M38039FFHWG 8-BIT, FLASH, 8.4 MHz, MICROCONTROLLER, PBGA64
MPC740ARX200TX 32-BIT, 200 MHz, RISC PROCESSOR, CBGA255
相關代理商/技術參數
參數描述
MC68HSC705C8ACFB 制造商:Rochester Electronics LLC 功能描述:8 BIT MCU, 304 BYTES RAM - Bulk
MC68HSC705C8ACP 制造商:Rochester Electronics LLC 功能描述: 制造商:Freescale Semiconductor 功能描述:
MC68HSC705C8ACS 制造商:Rochester Electronics LLC 功能描述:- Bulk
MC68HSC705J1ACDW 制造商:Rochester Electronics LLC 功能描述:- Bulk
MC68HSC705J1ACP 制造商:Rochester Electronics LLC 功能描述:8 BIT MCU, 64 BYTES RAM - Bulk
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*