參數資料
型號： ML9044
廠商： OKI SEMICONDUCTOR CO., LTD.
英文描述： DOT MATRIX LCD CONTROLLER DRIVER
中文描述： 點陣LCD控制器驅動
文件頁數： 21/55頁
文件大?。?/td> 538K
代理商： ML9044
Semiconductor
ML9044
21/54
2) Large character patterns (5
￥
11 dots) (See Table 3–2.)
(1) A method of writing character patterns to the CGRAM from the CPU
The four CGRAM address bits 0 to 3 select one of the lines constituting a character pattern.
First, set the mode to increment or decrement from the CPU, and then input the CGRAM address.
Write each line of the character pattern code in the CGRAM through DB
0
to DB
7
.
The data lines DB
0
to DB
7
correspond to the CGRAM data bits 0 to 7, respectively (see Table 3–
2). Input data “1” represents the ON status of an LCD dot and “0” represents the OFF status.
Since the ADC is automatically incremented or decremented by 1 after the data is written to the
CGRAM, it is not necessary to set the CGRAM address again.
The bottom line of a character pattern (the CGRAM address bits 0 to 3 are all “1”, which means
A in hexadecimal) is a cursor line. The ON/OFF pattern of this line is ORed with the cursor
pattern for displaying on the LCD. Therefore, the pattern data for the cursor position should be
all zeros to display the cursor.
Whereas the data given by the CGRAM data bits 0 to 4 with the CGRAM addresses 0 to A in
hexadecimal (set by the CGRAM address bits 0 to 3) is output as display data to the LCD, the data
given by the CGRAM data bits 5 to 7 or the CGRAM addresses B to F in hexadecimal is not. These
bits can be written and read as a RAM area.
(2) A method of displaying CGRAM character patterns on the LCD
The CGRAM is selected when the higher–order 4 bits of a character code are all zeros. Since bits
0 and 3 of a character code are not used, the character pattern “
b
” in Table 3–2 can be selected with
a character code “00”, “01”, “08” or “09” in hexadecimal.
When the 8–bit character code corresponding to a character pattern in the CGRAM is written to
the DDRAM, the character pattern is displayed in the display position specified by the DDRAM
address. (The DDRAM data bits 1 and 2 correspond to the CGRAM address bits 4 and 5,
respectively.)
相關PDF資料
PDF描述
ML9050 132-Channel LCD Driver with Built-in RAM for LCD Dot Matrix Displays
ML9051 132-Channel LCD Driver with Built-in RAM for LCD Dot Matrix Displays
ML9060 1/2 DUTY, 160-OUTPUT STATIC LCD DRIVER
ML9090-01 LCD Driver with Key Scanner and RAM(帶鍵掃描和RAM的LCD驅動器)
ML9090-02 LCD Driver with Key Scanner and RAM(帶鍵掃描和RAM的LCD驅動器)
相關代理商/技術參數
參數描述
ML9044A 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER DRIVER
ML9044A-XXACVWA 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER DRIVER
ML9044A-XXBCVWA 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER DRIVER
ML-90-4-5 功能描述:KNOB BLK MATTE.925"DIA.250"SHAFT RoHS:是 類別:硬件，緊固件，配件 >> 旋鈕 系列:ML 標準包裝:1 系列:- 樣式:圓柱形 類型:開槽 軸尺寸:0.250"（6.35mm） 直徑:1.031"（26.19mm） 高度:0.688"（17.48mm） 指示燈:無指示燈 材質:塑料 顏色:黑 特點:8-32 號固定螺絲
ML-90-4-6 功能描述:KNOB BLK MATTE.925"DIA.125"SHAFT RoHS:是 類別:硬件，緊固件，配件 >> 旋鈕 系列:ML 標準包裝:1 系列:- 樣式:圓柱形 類型:開槽 軸尺寸:0.250"（6.35mm） 直徑:1.031"（26.19mm） 高度:0.688"（17.48mm） 指示燈:無指示燈 材質:塑料 顏色:黑 特點:8-32 號固定螺絲
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*