<pre id="h4kbd"><td id="h4kbd"></td></pre>
<thead id="h4kbd"></thead>
  • <thead id="h4kbd"><ul id="h4kbd"></ul></thead>
  • 參數資料
    型號: MQ80C52TXXX-30SBR
    廠商: TEMIC SEMICONDUCTORS
    元件分類: 微控制器/微處理器
    英文描述: 8-BIT, MROM, 30 MHz, MICROCONTROLLER, CQFP44
    文件頁數: 19/141頁
    文件大?。?/td> 7628K
    代理商: MQ80C52TXXX-30SBR
    20
    2486AA–AVR–02/2013
    ATmega8(L)
    The EEPROM Address
    Register – EEARH and
    EEARL
    Bits 15..9 – Res: Reserved Bits
    These bits are reserved bits in the ATmega8 and will always read as zero.
    Bits 8..0 – EEAR8..0: EEPROM Address
    The EEPROM Address Registers – EEARH and EEARL – specify the EEPROM address in the
    512bytes EEPROM space. The EEPROM data bytes are addressed linearly between 0 and 511.
    The initial value of EEAR is undefined. A proper value must be written before the EEPROM may
    be accessed.
    The EEPROM Data
    Register – EEDR
    Bits 7..0 – EEDR7..0: EEPROM Data
    For the EEPROM write operation, the EEDR Register contains the data to be written to the
    EEPROM in the address given by the EEAR Register. For the EEPROM read operation, the
    EEDR contains the data read out from the EEPROM at the address given by EEAR.
    The EEPROM Control
    Register – EECR
    Bits 7..4 – Res: Reserved Bits
    These bits are reserved bits in the Atmel
    AVR ATmega8 and will always read as zero.
    Bit 3 – EERIE: EEPROM Ready Interrupt Enable
    Writing EERIE to one enables the EEPROM Ready Interrupt if the I bit in SREG is set. Writing
    EERIE to zero disables the interrupt. The EEPROM Ready interrupt generates a constant inter-
    rupt when EEWE is cleared.
    Bit 2 – EEMWE: EEPROM Master Write Enable
    The EEMWE bit determines whether setting EEWE to one causes the EEPROM to be written.
    When EEMWE is set, setting EEWE within four clock cycles will write data to the EEPROM at
    the selected address If EEMWE is zero, setting EEWE will have no effect. When EEMWE has
    been written to one by software, hardware clears the bit to zero after four clock cycles. See the
    description of the “Bit 1 – EEWE: EEPROM Write Enable” for an EEPROM write procedure.
    Bit 1 – EEWE: EEPROM Write Enable
    The EEPROM Write Enable Signal EEWE is the write strobe to the EEPROM. When address
    and data are correctly set up, the EEWE bit must be written to one to write the value into the
    EEPROM. The EEMWE bit must be written to one before a logical one is written to EEWE, oth-
    Bit
    151413121110
    9
    8
    –––
    ––––
    EEAR8
    EEARH
    EEAR7
    EEAR6
    EEAR5
    EEAR4
    EEAR3
    EEAR2
    EEAR1
    EEAR0
    EEARL
    765
    4321
    0
    Read/Write
    RR
    R
    RR
    R
    R/W
    Initial Value
    000
    0000
    X
    XX
    XXX
    Bit
    765
    4321
    0
    MSB
    LSB
    EEDR
    Read/Write
    R/W
    Initial Value
    000
    0000
    0
    Bit
    765
    4321
    0
    EERIE
    EEMWE
    EEWE
    EERE
    EECR
    Read/Write
    R
    R/W
    Initial Value
    0
    X
    0
    相關PDF資料
    PDF描述
    MR83C154XXX-25/883D 8-BIT, MROM, 25 MHz, MICROCONTROLLER, CQCC44
    MR83C154CXXX-25P883R 8-BIT, MROM, 25 MHz, MICROCONTROLLER, CQCC44
    MR80C52TXXX-30SBD 8-BIT, MROM, 30 MHz, MICROCONTROLLER, CQCC44
    MR80C52EXXX-12/883:R 8-BIT, MROM, 12 MHz, MICROCONTROLLER, CQCC44
    MR80C52XXX-12 8-BIT, MROM, 12 MHz, MICROCONTROLLER, CQCC44
    相關代理商/技術參數
    參數描述
    MQ82370-20 制造商:Rochester Electronics LLC 功能描述:- Bulk
    MQ8238020 制造商:Intel 功能描述:CONTROLLER: OTHER
    MQ82380-20 制造商:Rochester Electronics LLC 功能描述:- Bulk
    MQ82380-20/R 制造商:Rochester Electronics LLC 功能描述:
    MQ82592 制造商:Rochester Electronics LLC 功能描述:- Bulk