參數資料
型號： MULTILINK08UM
英文描述： MON08 Multilink Hardware Manual
中文描述： 的MON08多重硬件手冊
文件頁數： 39/52頁
文件大?。?/td> 517K
代理商： MULTILINK08UM
MON08 Multilink User Manual
39
P&E
Microcomputer
Systems, Inc.
MON08 MULTILINK
Class I
ICS Board with processor installed. This is the standard and most common
configuration of the ICS08 boards. In this configuration, the processor is
resident in one of the sockets on the ICS board itself. The processor can be
debugged and programmed in this configuration, and an emulation cable
containing all the processor I/O signals can be connected to the user’s
target board. In this configuration, the ICS board hardware can
automatically power up and down the processor in order to pass security in
the simplest fashion. The user has to be sure
not
to provide power from the
target, up through the emulation cable, to the processor pins themselves,
when this dialog appears. This is so that the software, when attempting to
establish communications, can fully power the processor down. The
software running on the PC controls power to the target via the serial port
DTR line. This configuration can be specified at startup in the software by
using the
ICS08
command-line parameter; otherwise the software will
remember the hardware configuration from session to session.
Class II
ICS Board without processor, connected to target viaMON08 Cable. In
thisconfiguration, there is no processor resident in any of thesockets of
the ICS board itself. The processor is mounted down in the target
system. The connection from the ICS board to the target is
accomplished via the 16-pin MON08 connector. In this configuration,
since the ICS does not control power to the processor, the user will be
prompted to turn the processor’s power supply on and off. Turning off
the power supply is necessary in order to be able to pass the initial
security mode check and access the flash on the processor. A simple
reset is not enough; to pass the security check, you must first force the
processor to encounter a POR (power-on reset) which requires that the
processor’s voltage dip below 0.1v. Once security has been passed,
resetting the device or re-entering the software should be easier. This
configuration can be specified at startup in the software by using the
MON08
command-line parameter; otherwise the software will
remember the hardware configuration from session to session.
Class III
Custom Board (no ICS) with MON08 serial port circuitry built in. In
this configuration, the ICS board is not used at all. The user must
provide a serial port connection from the PC, and provide all hardware
configuration necessary to force the processor into MON08 mode upon
reset. This includes resets both internal and external to the processor. In
this configuration, becausethe software does not directly control power
to the processor, the user will be prompted to turn the processor’s
相關PDF資料
PDF描述
MULTILYNX MultiLynx CL2151 Universal HFC? Interactive Cable Transceiver
MULTISYNCFE750 Monitor_ICs:HD6433577 LA7841 BA9761F MQ571 XC13289LSP LSC3820P2 uPD61882A
MUM8128W-17 x8 EPROM
MUM8128W-20 x8 EPROM
MUM8128W-25 x8 EPROM
相關代理商/技術參數
參數描述
MULTILYNX 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MultiLynx CL2151 Universal HFC? Interactive Cable Transceiver
MULTIMAX-8G+ 功能描述:程序設計器 - 基于通用和內存 HI PERF STAND ALONE PRGRAMER FOR 8-SOCK RoHS:否 制造商:Xeltek 產品:Universal Device Programmers 工具用于評估:EPROM, Parallel/Serial EEPROM, FPGA, PROM, Flash, BPROM, MCUs, PLD Devices 接口類型:Parallel, USB 工作電源電壓:90 VAC to 250 VAC
MULTIPHSPOL-RD 功能描述:電源管理IC開發工具 Si825x Multi-Phase POL Reference Design RoHS:否 制造商:Maxim Integrated 產品:Evaluation Kits 類型:Battery Management 工具用于評估:MAX17710GB 輸入電壓: 輸出電壓:1.8 V
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*