參數資料
型號： R80C52XXX-12SHXXX
廠商： ATMEL CORP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 12 MHz, MICROCONTROLLER, CQCC44
封裝： LCC-44
文件頁數： 82/101頁
文件大?。?/td> 3398K
代理商： R80C52XXX-12SHXXX
104
Figure 7-4 to Figure 7-8 illustrate typical spectra of the transmitted signals of the
AT86RF212 and do not claim any limits.
Refer to the local authority bodies (FCC, ETSI, etc.) for further details about definition of
power spectral density masks, definition of spurious emission, allowed modulation
bandwidth, transmit power, and its limits.
7.3.4 TX Output Power
The maximum output power of the transmitter is typically 5 dBm in normal mode and 10
dBm in boost mode. The TX output power can be set via register bits TX_PWR (register
0x05, PHY_TX_PWR). The output power of the transmitter can be controlled down to
-11 dBm dB with 1 dB resolution.
To meet the spectral requirements of the European and Chinese bands, it is necessary
to limit the TX power by appropriate setting of TX_PWR, GC_PA (register 0x05,
PHY_TX_PWR), and GC_TX_OFFS (register 0x16, TX_CTRL_0). See Table 7-15 and
Table 7-16 for recommended values.
7.3.5 TX Power Ramping
To optimize the output power spectral density (PSD), individual transmitter blocks are
enabled sequentially. A transmit action is started by either the rising edge of pin
SLP_TR or the command TX_START in register 0x02. One symbol period later the data
transmission begins. During this time period, the PLL settles to the frequency used for
transmission. The PA is enabled prior to the data transmission start. This PA lead time
can be adjusted with the value PA_LT in register 0x16 (RF_CTRL_0). The PA is always
enabled at the lowest gain value corresponding to GC_PA = 0. Then the PA gain is
increased automatically to the value set by GC_PA in register 0x16 (RF_CTRL_0). After
transmission is completed, TX power ramping down is performed in an inverse order.
The control signals associated with TX power ramping are shown in Figure 7-9. In this
example, the transmission is initiated with the rising edge of pin 11 (SLP_TR). The radio
transceiver state changes from PLL_ON to BUSY_TX.
Figure 7-9. TX Power Ramping Example (O-QPSK 250 kbit/s Mode)
Using an external RF front-end (refer to section 9.4), it may be required to adjust the
startup time of the external PA relative to the internal building blocks to optimize the
overall PSD. This can be achieved using register bits PA_LT (register 0x16,
RF_CTRL_0).
AT86RF212
8168C-MCU Wireless-02/10
相關PDF資料
PDF描述
MQ80C32-12SBR 8-BIT, 12 MHz, MICROCONTROLLER, CQFP44
IF180C52XXX-36D 8-BIT, MROM, 36 MHz, MICROCONTROLLER, PQFP44
IV80C32XXX-36 8-BIT, 36 MHz, MICROCONTROLLER, PQFP44
IF180C52CXXX-20R 8-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP44
IF180C52CXXX-20R 8-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP44
相關代理商/技術參數
參數描述
R80ES11WES 制造商:UNBRANDED 功能描述:LAMP ENERGY SAVING R80 11W ES
R80M 制造商:Omron Corporation 功能描述:
R80P 制造商:Orion Fans 功能描述:Filter Kit; Retainer only; ABS UL94V-0; Fits 80mm Fan; 83.6mm W; 9.8mm D
R80X5200CK 制造商:Samsung Semiconductor 功能描述:100 Pack 52x80 Minute CD-R Media
R8-10 制造商:JST Manufacturing 功能描述:8AWG 29.8mm 15mm 制造商:JST Manufacturing 功能描述:Terminal,R8-10
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*