![](http://datasheet.mmic.net.cn/330000/RTL8139C_datasheet_16451889/RTL8139C_2.png)
RTL8139C(L)
2002/01/10
Rev.1.4
2
1. Features
z
128 pin QFP/LQFP
z
Integrated Fast Ethernet MAC, Physical chip and
transceiver in one chip
z
10 Mb/s and 100 Mb/s operation
z
Supports
Auto-negotiation operation
10
Mb/s
and
100
Mb/s
N-way
z
PCI local bus single-chip Fast Ethernet controller
Compliant to PCI Revision 2.2
Supports PCI clock 16.75MHz-40MHz
Supports PCI target fast back-to-back transaction
Provides PCI bus master data transfers and PCI memory
space or I/O space mapped data transfers of
RTL8139C(L)'s operational registers
Supports PCI VPD (Vital Product Data)
Supports ACPI, PCI power management
z
Supports CardBus. The CIS can be stored in 93C56 or
expansion ROM
z
Supports up to 128K bytes Boot ROM interface for both
EPROM and Flash memory
z
Supports 25MHz crystal or 25MHz OSC as the internal
clock source. The frequency deviation of either crystal or
OSC must be within 50 PPM.
z
Compliant to PC99 standard
z
Supports Wake-On-LAN function and remote wake-up
(Magic Packet*, LinkChg and Microsoft
wake-up
frame)
z
Supports 4 Wake-On-LAN (WOL) signals (active high,
active low, positive pulse, and negative pulse)
Note: The model number of the QFP package is RTL8139C. The LQFP package model number is RTL8139CL.
z
Supports auxiliary power-on internal reset, to be ready
for remote wake-up when main power still remains off
z
Supports auxiliary power auto-detect, and sets the
related capability of power management registers in PCI
configuration space.
z
Includes a programmable, PCI burst size and early
Tx/Rx threshold.
z
Supports a 32-bit general-purpose timer with the
external PCI clock as clock source, to generate
timer-interrupt
z
Contains two large (2Kbyte) independent receive and
transmit FIFO’s
z
Advanced power saving mode when LAN function or
wakeup function is not used
z
Uses 93C46 (64*16-bit EEPROM) or 93C56
(128*16-bit EEPROM) to store resource configuration,
ID parameter, and VPD data. The 93C56 can also be
used to store the CIS data structure for CardBus
application.
z
Supports LED pins for various network activity
indications
z
Supports digital and analog loopback capability on both
ports
z
Half/Full duplex capability
z
Supports Full Duplex Flow Control (IEEE 802.3x)
z
3.3V power supply with 5V tolerant I/Os.
* Third-party brands and names are the property of their
respective owners.