參數資料
型號： SST89V58RD2-33-C-NJE
廠商： Microchip Technology
文件頁數： 26/92頁
文件大小： 0K
描述： IC MCU 8BIT 40KB FLASH 44PLCC
標準包裝： 26
系列： FlashFlex®
核心處理器： 8051
芯體尺寸： 8-位
速度： 33MHz
連通性： EBI/EMI，SPI，UART/USART
外圍設備： 欠壓檢測/復位，POR，WDT
輸入/輸出數： 36
程序存儲器容量： 32KB（32K x 8）
程序存儲器類型： 閃存
EEPROM 大小： 8K x 8
RAM 容量： 1K x 8
電壓 - 電源 (Vcc/Vdd)： 2.7 V ~ 3.6 V
振蕩器型： 外部
工作溫度： 0°C ~ 70°C
封裝/外殼： 44-LCC（J 形引線）
包裝： 管件
2011 Silicon Storage Technology, Inc.
DS25087A
10/11
32
FlashFlex MCU
SST89V54RD2/RD / SST89V58RD2/RD
Not Recommended for New Designs
A Microchip Technology Company
Symbol
Function
TF2
Timer 2 overflow flag set by a Timer 2 overflow and must be cleared by software. TF2
will not be set when either RCLK or TCLK = 1.
EXF2
Timer 2 external flag set when either a capture or reload is caused by a negative
transition on T2EX and EXEN2 = 1. When Timer 2 interrupt is enabled, EXF2 = 1 will
cause the CPU to vector to the Timer 2 interrupt routine. EXF2 must be cleared by
software. EXF2 does not cause an interrupt in up/down counter mode (DCEN = 1).
RCLK
Receive clock flag. When set, causes the serial port to use Timer 2 overflow pulses for
its receive clock in modes 1 and 3. RCLK = 0 causes Timer 1 overflow to be used for the
receive clock.
TCLK
Transmit clock flag. When set, causes the serial port to use Timer 2 overflow pulses for
its transmit clock in modes 1 and 3. TCLK = 0 causes Timer 1 overflow to be used for
the transmit clock.
EXEN2
Timer 2 external enable flag. When set, allows a capture or reload to occur as a result of
a negative transition on T2EX if Timer 2 is not being used to clock the serial port.
EXEN2 = 0 causes Timer 2 to ignore events at T2EX.
TR2
Start/stop control for Timer 2. A logic 1 starts the timer.
C/T2#
Timer or counter select (Timer 2)
0: Internal timer (OSC/6 in 6 clock mode, OSC/12 in 12 clock mode)
1: External event counter (falling edge triggered)
CP/RL2#
Capture/Reload flag. When set, captures will occur on negative transitions at T2EX if
EXEN2 = 1. When cleared, auto-reloads will occur either with Timer 2 overflows or
negative transitions at T2EX when EXEN2 = 1. When either RCLK = 1 or TCLK = 1, this
bit is ignored and the timer is forced to auto-reload on Timer 2 overflow.
Symbol
Function
XDon’t Care
-
Not implemented, reserved for future use.
Note: User should not write ‘1’s to reserved bits. The value read from a reserved bit is indeterminate.
T2OE
Timer 2 Output Enable bit.
DCEN
Down Count Enable bit. When set, this allows Timer 2 to be configured as an up/down
counter.
Timer/Counter 2 Control Register (T2CON)
Location
76543210
Reset
Value
C8H
TF2
EXF2
RCLK
TCLK
EXEN2
TR2
C/T2#
CP/RL2#
00H
Timer/Counter 2 Mode Control (T2MOD)
Location
76543210
Reset
Value
C9H
X
-----
T2OE
DCEN
xxxxxx00b
相關PDF資料
PDF描述
VI-21L-IX-S CONVERTER MOD DC/DC 28V 75W
SST89V54RD2-33-C-NJE IC MCU 8BIT 24KB FLASH 44PLCC
MMCX-P-178B/U CONN MMCX PLUG STRAIGHT RG178
VE-23T-IX-S CONVERTER MOD DC/DC 6.5V 75W
MMCX-P-FHSB CONN MMCX PLUG STRAIGHT FHSB
相關代理商/技術參數
參數描述
SST89V58RD2-33-C-NJE1 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:FlashFlex51 MCU
SST89V58RD2-33-C-NJF2 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:FlashFlex51 MCU
SST89V58RD2-33-C-PI 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:FlashFlex51 MCU
SST89V58RD2-33-C-PIE1 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:FlashFlex51 MCU
SST89V58RD2-33-C-PIF2 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:FlashFlex51 MCU
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*