REV. 5.0.3 2.90V TO 5.5V UART WITH 32-BYTE FIFO EFR[3:0]: Software Flow Control Select Combinations of software flow control can b" />
參數資料
型號: ST16C650AIQ48-F
廠商: Exar Corporation
文件頁數: 29/50頁
文件大?。?/td> 0K
描述: IC UART FIFO 32B 48TQFP
標準包裝: 250
特點: *
通道數: 1,UART
FIFO's: 32 字節
規程: 打印機,RS232,RS422,RS485
電源電壓: 2.9 V ~ 5.5 V
帶并行端口:
帶IrDA 編碼器/解碼器:
帶故障啟動位檢測功能:
帶調制解調器控制功能:
帶CMOS:
安裝類型: 表面貼裝
封裝/外殼: 48-TQFP
供應商設備封裝: 48-TQFP(7x7)
包裝: 托盤
ST16C650A
35
REV. 5.0.3
2.90V TO 5.5V UART WITH 32-BYTE FIFO
EFR[3:0]: Software Flow Control Select
Combinations of software flow control can be selected by programming these bits.
TABLE 12: SOFTWARE FLOW CONTROL FUNCTIONS
EFR BIT-3
EFR BIT-2
EFR BIT-1
EFR BIT-0
TRANSMIT AND RECEIVE SOFTWARE FLOW CONTROL
0
No TX and RX flow control (default and reset)
0
X
No transmit flow control
1
0
X
Transmit Xon1/Xoff1
0
1
X
Transmit Xon2/Xoff2
1
X
Transmit Xon1 and Xon2/Xoff1 and Xoff2
X
0
No receive flow control
X
1
0
Receiver compares Xon1/Xoff1
X
0
1
Receiver compares Xon2/Xoff2
1
0
1
Transmit Xon1/ Xoff1,
Receiver compares Xon1 or Xon2, Xoff1 or Xoff2
0
1
Transmit Xon2/Xoff2,
Receiver compares Xon1 or Xon2, Xoff1 or Xoff2
1
Transmit Xon1 and Xon2/Xoff1 and Xoff2,
Receiver compares Xon1 and Xon2/Xoff1 and Xoff2
0
1
No transmit flow control,
Receiver compares Xon1 and Xon2/Xoff1 and Xoff2
EFR[4]: Enhanced Function Bits Enable
Enhanced function control bit. This bit enables IER bits 4-7, ISR bits 4-5, FCR bits 4-5, MCR bits 5-7, XFR bits
0-7 and IRPW bits 0-7 to be modified. After modifying any enhanced bits, EFR bit-4 can be set to a logic 0 to
latch the new values. This feature prevents legacy software from altering or overwriting the enhanced functions
once set. Normally, it is recommended to leave it enabled, logic 1.
Logic 0 = modification disable/latch enhanced features. IER bits 4-7, ISR bits 4-5, FCR bits 4-5, MCR bits 5-
7, XFR bits 0-7 and IRPW bits 0-7 are saved to retain the user settings. After a reset, the IER bits 4-7, ISR
bits 4-5, FCR bits 4-5, MCR bits 5-7, XFR bits 0-7 and IRPW bits 0-7 are set to a logic 0 to be compatible with
ST16C550 mode. (default).
Logic 1 = Enables the above-mentioned register bits to be modified by the user.
EFR[5]: Special Character Detect Enable
Logic 0 = Special Character Detect Disabled. (default)
Logic 1 = Special Character Detect Enabled. The UART compares each incoming receive character with
data in Xoff-2 register. If a match exists, the received data will be transferred to FIFO and ISR bit-4 will be set
to indicate detection of the special character. Bit-0 corresponds with the LSB bit for the receive character. If
flow control is set for comparing Xon1, Xoff1 (EFR [1:0]=10) then flow control and special character work
normally. However, if flow control is set for comparing Xon2, Xoff2 (EFR[1:0]=01) then flow control works
normally, but Xoff2 will not go to the FIFO, and will generate an Xoff interrupt and a special character
interrupt.
相關PDF資料
PDF描述
XR16L2450IM-F IC UART FIFO 1B DUAL 48TQFP
XR68C192CJTR-F IC UART FIFI DUAL 44PLCC
ST16C2450IJ44-F IC UART FIFO DUAL 44PLCC
ST16C452CJ68-F IC UART W/PAR PORT DUAL 68PLCC
XR16L2750CJ-F IC UART FIFO 64B DUAL 44PLCC
相關代理商/技術參數
參數描述
ST16C650AIQ48TR 制造商:Rochester Electronics LLC 功能描述: 制造商:Exar Corporation 功能描述:
ST16C650AIQ48TR-F 功能描述:UART 接口集成電路 UART W/32BYTEFIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
ST16C650CJ44 制造商:Rochester Electronics LLC 功能描述: 制造商:Exar Corporation 功能描述:
ST16C650CJ44-F 功能描述:UART 接口集成電路 UART W/32 BYTE FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
ST16C650CP40 功能描述:UART 接口集成電路 UART W/32 BYTE FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel