參數資料
型號： TDA8046H
廠商： NXP SEMICONDUCTORS
元件分類： 消費家電
英文描述： Multi-mode QAM demodulator
中文描述： SPECIALTY CONSUMER CIRCUIT, PQFP64
文件頁數： 9/48頁
文件大?。?/td> 245K
代理商： TDA8046H
1996 Nov 19
9
Philips Semiconductors
Product specification
Multi-mode QAM demodulator
TDA8046
7.1
Functional description of the individual blocks
The functional block diagram of the multi-mode QAM
demodulator is illustrated in Fig.1. This section describes
the individual blocks in the demodulator. After adaptation
for the used input format (2’s complement or binary), the
input signal is demodulated in the I and Q baseband
signals which are applied to the inputs of the half-Nyquist
filter (equals square root raised cosine). To avoid
overloading of the ADC, an AGC detector is placed after
the adaptation for the input format. The control value for
the clock recovery is generated after half Nyquist filtering.
The echoes created in the cable network are reduced
significantly in the equalizer.
The equalizer produces a ‘clean’ constellation diagram
from which the information for the carrier recovery is
derived. This constellation is also applied to the output
formatter which demaps the transmitted symbols in
corresponding bits. The carrier recovery and lock
detection functions are based on the equalizer output.
The output of the equalizer is applied to an output
formatter, which translates the symbol bits to a FEC input
format. The digital outputs of the clock recovery, AGC, and
carrier recovery section are converted into currents which
are integrated by the loop filters.
To make these loop filters active, operational amplifiers
are integrated on the chip.
The TDA8046 can handle five different digital modulation
schemes; 4, 16, 32, 64 and 256-QAM. These schemes
are selectable via the I
2
C-bus interface.
7.1.1
Q
UADRATURE DEMODULATOR AND HALF
N
YQUIST
FILTER
Quadrature demodulation is accomplished after selection
of the appropriate input format via the I
2
C-bus.
The in-phase and quadrature components are both
applied to a half Nyquist filter. In default mode, this filter
gives a 20% roll-off half Nyquist shaping. The basic
schematic of the quadrature demodulator followed by the
half Nyquist filter is shown in Fig.4. The signs of the
multiplication factors in the Q-branch can be inverted
(I
2
C-bus bit INVD).
When using an 8-bit ADC the LSB of the 9-bit input word
should be connected to the positive supply (V
DDD
).
This ensures a symmetrical 2’s complement
representation which can be multiplied by
1 in a correct
(2’s complement) way. The overall transfer function of the
square root raised cosine filters is shown in Figs 5 and 6.
For characteristics see Chapter 10.
Fig.4 Schematic diagram of the quadrature demodulator and half Nyquist filter.
handbook, full pagewidth
HALF NYQUIST
FILTER
HALF NYQUIST
FILTER
+
1, 0,
1, 0
0,
1, 0,
+
1
9
9
DIN8
to
DIN0
BINARY OR
TWO's
COMPLEMENT
I
I
2
C-BUS
I
2
C-BUS
Q
MGG168
9
I
2
C-BUS
I
2
C-BUS
相關PDF資料
PDF描述
TDA8060ATS Satellite ZERO-IF QPSK down-converter
TDA8060TS Satellite ZERO-IF QPSK down-converter
TDA8361 Integrated PAL and PAL/NTSC TV processors(集成PAL和PAL/NTSC TV處理器)
TDA8362 Integrated PAL and PAL/NTSC TV processors(集成PAL和PAL/NTSC TV處理器)
TDA8360 Integrated PAL and PAL/NTSC TV processors(集成PAL和PAL/NTSC TV處理器)
相關代理商/技術參數
參數描述
TDA8050 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:TDA8046H
TDA8050A 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:QPSK transmitter
TDA8050T 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:TDA8046H
TDA8051 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:QPSK receiver
TDA8060ATS 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Satellite ZERO-IF QPSK down-converter
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*