- 您現在的位置：買賣IC網 > PDF目錄383990 > TDA9874APS (NXP SEMICONDUCTORS) Digital TV sound demodulator/decoder PDF資料下載
參數資料
| 型號： | TDA9874APS |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 接收器 |
| 英文描述： | Digital TV sound demodulator/decoder |
| 中文描述： | AM/FM, AUDIO DEMODULATOR, PDIP42 |
| 封裝： | 0.600 INCH, SHRINK, PLASTIC, MS-020, SOT-270-1, DIP-42 |
| 文件頁數： | 40/68頁 |
| 文件大?。?/td> | 231K |
| 代理商： | TDA9874APS |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁當前第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁
1999 Dec 03
40
Philips Semiconductors
Preliminary specification
Digital TV sound demodulator/decoder
TDA9874A
10.3.12 NICAM C
ONFIGURATION
R
EGISTER
(NCONR)
The default setting after power-on reset is ‘0000 0000’.
Table 40
NICAM configuration register (subaddress 14)
Table 41
Description of the NCONR bits; see notes 1 to 4
Notes
1.
The decision of whether auto-muting is permitted will be taken by the controlling microprocessor based on
information contained in the TDA9874A’s status registers. Thus, it depends on the strategy implemented in the
software whether the auto-mute function is in accordance with “NICAM 728 ETS Revised for Data Applications”or
any other preference.
The NICAM de-emphasis gain is 0 dB at 40 Hz.
The AMSEL bit has only an effect on the analog sound outputs (OUTL, OUTR and OUTM). With regard to the digital
sound output (I
2
S-bus), the auto-mute will only switch between NICAM and the first sound carrier.
The DCXO test mode is intended for checking the DCXO control range with the actually used PCB layout and crystal
type. During normal operation, the DCXO test mode should not be used.
2.
3.
4.
7
6
5
4
3
2
1
0
DCXOPULL
DCXOTEST
0
DOUTEN
0
AMSEL
NDEEM
AMUTE
BIT
SYMBOL
DESCRIPTION
7
DCXOPULL
DCXO frequency select:
selects DCXO lower or upper test frequency during DCXO
test mode. When DCXOPULL = 1 it sets the DCXO to the lower DCXO frequency. When
DCXOPULL = 0 it sets the DCXO to its higher frequency.
DCXO test mode enable:
when DCXOTEST = 1 it enables the DCXO test mode
(available only during FM mode). In this mode frequency pulling via DCXOPULL is
enabled. When DCXOTEST = 0 it enables normal operation.
this bit is not used and should be set to logic 0
Data output enable:
when DOUTEN = 1 it enables the output of the NICAM serial data
stream from the DQPSK demodulator and of the associated clock, PCLK. When
DOUTEN = 0, both outputs will be 3-stated.
this bit is not used and should be set to logic 0
Auto-mute select:
when AMSEL = 1 the auto-mute will switch between NICAM sound
and the analog mono input. This bit only has an effect when the auto-mute function is
enabled and when the DAC has been selected in the analog output select register
(see Section 10.3.18). When AMSEL = 0, the auto-mute will switch between NICAM
sound and the sound on the first sound carrier (i.e. FM mono or AM).
De-emphasis on/off:
when NDEEM = 1 it switches the NICAM J17 de-emphasis off.
When NDEEM = 0 it switches the NICAM J17 de-emphasis on.
Auto-muting on/off:
when AMUTE = 1 automatic muting is disabled. This bit only has
an effect when the second sound carrier is set to NICAM. When AMUTE = 0 it enables
the automatic switching between NICAM and the program on the first sound carrier (i.e.
FM mono or AM), depending on the NICAM bit error rate. The FM dematrix should be
set to the mono position or IDSWFM (subaddress 11) should be set.
6
DCXOTEST
5
4
DOUTEN
3
2
AMSEL
1
NDEEM
0
AMUTE
相關PDF資料 |
PDF描述 |
|---|---|
| TDCS6440G | SONET/SDH 40 Gbits/s Cross Connect( SONET/SDH 40G位/秒交叉連接器件) |
| TDK5100F | 434 MHz ASK/FSK Transmitter in 10-pin Package |
| TDK5100 | ASK/FSK Transmitter 868/433 MHz |
| TE28F004S3-150 | BYTE-WIDE SMART 3 FlashFile MEMORY FAMILY 4, 8, AND 16 MBIT |
| TE28F008S3-150 | BYTE-WIDE SMART 3 FlashFile MEMORY FAMILY 4, 8, AND 16 MBIT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TDA9874H | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Digital TV sound demodulator/decoder |
| TDA9875 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Digital TV Sound Processor DTVSP |
| TDA9875A | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Digital TV Sound Processor DTVSP |
| TDA9875AH | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Digital TV Sound Processor DTVSP |
| TDA9875AH/V2,557 | 功能描述:IC SOUND PROC DGTL TV 64QFP RoHS:是 類別:集成電路 (IC) >> 線性 - 音頻處理 系列:- 其它有關文件:STA321 View All Specifications 標準包裝:1 系列:Sound Terminal™ 類型:音頻處理器 應用:數字音頻 安裝類型:表面貼裝 封裝/外殼:64-LQFP 裸露焊盤 供應商設備封裝:64-LQFP EP（10x10） 包裝:Digi-Reel® 其它名稱:497-11050-6 |
發布緊急采購，3分鐘左右您將得到回復。