參數資料
型號： TH50VSF2581AASB
廠商： Toshiba Corporation
元件分類： 圓形連接器
英文描述： Circular Connector; MIL SPEC:MIL-C-5015; Body Material:Metal; Series:GT; No. of Contacts:7; Connector Shell Size:18; Connecting Termination:Solder; Circular Shell Style:Square Flange Receptacle; Body Style:Straight
中文描述： SRAM和閃存混合多芯片封裝
文件頁數： 20/50頁
文件大小： 546K
代理商： TH50VSF2581AASB
TH50VSF2580/2581AASB
2001-10-26 20/50
ID Read Mode
ID Read mode is used to read the device maker code and device code. The mode is useful for EPROM
programmers to automatically identify the device type.
In this method, simultaneous operation can be performed. Inputting an ID Read command sets the specified
bank to ID Read mode. Banks are specified by inputting the bank address (BK) in the third bus write cycle of
the command cycle. To read an ID code, the bank address as well as the ID read address must be specified.
From address BK
+
00 the maker code is output; from address BK
+
01 the device code is output. From other
banks, data are output from the memory cells. Inputting a Reset command releases ID Read mode and returns
the device to Read mode.
Access time in ID Read mode is the same as that in Read mode. For the codes, see the ID Code Table.
Standby Mode
There are two ways to put the device into Standby Mode.
(1) Control using CEF and RESET
With the device in Read Mode, input V
DD
±
0.3 V to CEF and RESET . The device will enter Standby
Mode and the current will be reduced to the standby current (I
CCS1
). However, if the device is in the process
of performing simultaneous operation, the device will not enter Standby Mode but will instead cause the
operating current to flow.
(2) Control using RESET only
With the device in Read Mode, input V
SS
±
0.3 V to RESET . The device will enter Standby Mode and the
current will be reduced to the standby current (I
CCS1
). Even if the device is in the process of performing
simultaneous operation, this method will terminate the current operation and set the device to Standby
Mode. This is a hardware reset and is described later.
In Standby Mode DQ is put in High-Impedance state.
Auto-Sleep Mode
This function suppresses power dissipation during reading. If the address input does not change for 150 ns,
the device will automatically enter Sleep Mode and the current will be reduced to the standby current (I
CCS2
).
However, if the device is in the process of performing simultaneous operation, the device will not enter Standby
Mode but will instead cause the operating current to flow. Because the output data is latched, data is output in
Sleep Mode. When the address is changed, Sleep Mode is automatically released, and data from the new
address is output.
Output Disable Mode
Inputting V
IH
to OE disables output from the device and sets DQ to High-Impedance.
相關PDF資料
PDF描述
TH50VSF3582AASB TOSHIBA MULTI-CHIP INTEGRATED CIRCUIT SILICON GATE CMOS
TH50VSF3583AASB TOSHIBA MULTI-CHIP INTEGRATED CIRCUIT SILICON GATE CMOS
TH50VSF3680 0.4W, 75V, 0.3A, SIGNAL DIODE, SOD123
TH50VSF3681AASB GT 10C 10#16 SKT RECP BOX RM
TH513 RF & MICROWAVE TRANSISTORS HF SSB APPLICATIONS
相關代理商/技術參數
參數描述
TH50VSF2582 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:SRAM AND FLASH MEMORY MIXED MULTI-CHIP PACKAGE
TH50VSF2582AASB 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:SRAM AND FLASH MEMORY MIXED MULTI-CHIP PACKAGE
TH50VSF2583AASB 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:SRAM AND FLASH MEMORY MIXED MULTI-CHIP PACKAGE
TH50VSF3582AASB 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:TOSHIBA MULTI-CHIP INTEGRATED CIRCUIT SILICON GATE CMOS
TH50VSF3583AASB 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:TOSHIBA MULTI-CHIP INTEGRATED CIRCUIT SILICON GATE CMOS
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*