參數資料
型號: TMS320C6205DZHK200
廠商: Texas Instruments
文件頁數: 26/73頁
文件大?。?/td> 0K
描述: IC FIXED-POINT DSP 288-BGA
標準包裝: 1
系列: TMS320C62x
類型: 定點
接口: McBSP,PCI
時鐘速率: 200MHz
非易失內存: 外部
芯片上RAM: 128kB
電壓 - 輸入/輸出: 3.30V
電壓 - 核心: 1.50V
工作溫度: 0°C ~ 90°C
安裝類型: 表面貼裝
封裝/外殼: 288-LFBGA
供應商設備封裝: 288-BGA Microstar(16x16)
包裝: 托盤
TMS320C6205
FIXEDPOINT DIGITAL SIGNAL PROCESSOR
SPRS106G OCTOBER 1999 REVISED JULY 2006
32
POST OFFICE BOX 1443
HOUSTON, TEXAS 772511443
power-supply sequencing
TI DSPs do not require specific power sequencing between the core supply and the I/O supply. However,
systems should be designed to ensure that neither supply is powered up for extended periods of time if the other
supply is below the proper operating voltage.
system-level design considerations
System-level design considerations, such as bus contention, may require supply sequencing to be
implemented. In this case, the core supply should be powered up at the same time as, or prior to (and powered
down after), the I/O buffers. This is to ensure that the I/O buffers receive valid inputs from the core before the
output buffers are powered up, thus, preventing bus contention with other chips on the board.
power-supply design considerations
For systems using the C6000
DSP platform of devices, the core supply may be required to provide in excess
of 2 A per DSP until the I/O supply is powered up. This extra current condition is a result of uninitialized logic
within the DSP(s) and is corrected once the CPU sees an internal clock pulse. With the PLL enabled, as the
I/O supply is powered on, a clock pulse is produced stopping the extra current draw from the supply. With the
PLL disabled, as many as five external clock cycle pulses may be required to stop this extra current draw. A
normal current state returns once the I/O power supply is turned on and the CPU sees a clock pulse. Decreasing
the amount of time between the core supply power up and the I/O supply power up can minimize the effects
of this current draw.
A dual-power supply with simultaneous sequencing, such as that available with TPS563xx controllers or
PT69xx plug-in power modules, can be used to eliminate the delay between core and I/O power up [see the
Using the TPS56300 to Power DSPs application report (literature number SLVA088)]. A Schottky diode can also
be used to tie the core rail to the I/O rail, effectively pulling up the I/O power supply to a level that can help initialize
the logic within the DSP.
Core and I/O supply voltage regulators should be located close to the DSP (or DSP array) to minimize
inductance and resistance in the power delivery path. Additionally, when designing for high-performance
applications utilizing the C6000
platform of DSPs, the PC board should include separate power planes for
core, I/O, and ground, all bypassed with high-quality low-ESL/ESR capacitors.
相關PDF資料
PDF描述
TMS320C6205DGHK200 IC FIXED-POINT DSP 288-BGA
TAJB476K010H CAP TANT 47UF 10V 10% 1210
EEM11DSEF-S243 CONN EDGECARD 22POS .156 EYELET
TRJD336M025RRJ CAP TANT 33UF 25V 20% 2917
GCM12DCCS-S189 CONN EDGECARD 24POS R/A .156 SLD
相關代理商/技術參數
參數描述
TMS320C6205GFN100 制造商:TI 制造商全稱:Texas Instruments 功能描述:FIXED-POINT DIGITAL SIGNAL PROCESSOR
TMS320C6205GGP100 制造商:TI 制造商全稱:Texas Instruments 功能描述:FIXED-POINT DIGITAL SIGNAL PROCESSOR
TMS320C6205GHK100 制造商:TI 制造商全稱:Texas Instruments 功能描述:FIXED-POINT DIGITAL SIGNAL PROCESSOR
TMS320C6205GHK200 功能描述:數字信號處理器和控制器 - DSP, DSC Fixed-Pt Dig Signal Proc RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT
TMS320C6205GHKA200 功能描述:數字信號處理器和控制器 - DSP, DSC Fixed-Pt Dig Signal Proc RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT