參數資料
型號: XCF32PVOG48C
廠商: Xilinx Inc
文件頁數: 2/35頁
文件大?。?/td> 0K
描述: IC PROM SRL 1.8V 32M GATE 48TSOP
產品變化通告: VOG48 New Shipping Trays Notification 25/Apr/2011
標準包裝: 96
可編程類型: 系統內可編程
存儲容量: 32Mb
電源電壓: 1.65 V ~ 2 V
工作溫度: -40°C ~ 85°C
封裝/外殼: 48-TFSOP(0.724",18.40mm 寬)
供應商設備封裝: 48-TSOP
包裝: 管件
產品目錄頁面: 601 (CN2011-ZH PDF)
其它名稱: 122-1458
122-1458-5
122-1458-5-ND
Platform Flash In-System Programmable Configuration PROMs
DS123 (v2.18) May 19, 2010
Product Specification
10
R
Initiating FPGA Configuration
The options for initiating FPGA configuration via the
Platform Flash PROM include:
Automatic configuration on power up
Applying an external pulse to the FPGA PROGRAM_B
pin
Applying the JTAG CONFIG instruction to the PROM
Following the FPGA’s power-on sequence or the assertion
of the PROGRAM_B pin, the FPGA’s configuration memory
is cleared, the configuration mode is selected, and the
FPGA is ready to accept a new configuration bitstream. The
FPGA’s PROGRAM_B pin can be controlled by an external
source, or alternatively, the Platform Flash PROMs
incorporate a CF pin that can be tied to the FPGA’s
PROGRAM_B pin. Executing the CONFIG instruction
through JTAG pulses the CF output Low once for
300-500 ns, resetting the FPGA and initiating configuration.
The iMPACT software can issue the JTAG CONFIG
command to initiate FPGA configuration by setting the
“Load FPGA” option.
When using the XCFxxP Platform Flash PROM with design
revisioning enabled, the CF pin should always be connected
to the PROGRAM_B pin on the FPGA to ensure that the
current design revision selection is sampled when the
FPGA is reset. The XCFxxP PROM samples the current
design revision selection from the external REV_SEL pins
or the internal programmable Revision Select bits on the
rising edge of CF. When the JTAG CONFIG command is
executed, the XCFxxP samples the new design revision
selection before initiating the FPGA configuration
sequence. When using the XCFxxP Platform Flash PROM
without design revisioning, if the CF pin is not connected to
the FPGA PROGRAM_B pin, then the XCFxxP CF pin must
be tied High.
X-Ref Target - Figure 5
Figure 5: Design Revision Storage Examples
REV 0
(8 Mbits)
REV 1
(8 Mbits)
REV 2
(8 Mbits)
REV 3
(8 Mbits)
REV 0
(8 Mbits)
REV 1
(8 Mbits)
REV 2
(16 Mbits)
REV 0
(16 Mbits)
REV 1
(16 Mbits)
REV 0
(8 Mbits)
REV 1
(24 Mbits)
REV 0
(32 Mbits)
4 Design Revisions
3 Design Revisions
2 Design Revisions
1 Design Revision
(a) Design Revision storage examples for a single XCF32P PROM
REV 0
(16 Mbits)
REV 1
(16 Mbits)
REV 2
(16 Mbits)
REV 3
(16 Mbits)
REV 0
(16 Mbits)
REV 1
(16 Mbits)
REV 2
(32 Mbits)
REV 0
(32 Mbits)
REV 1
(32 Mbits)
REV 0
(16 Mbits)
REV 1
(16 Mbits)
REV 0
(32 Mbits)
4 Design Revisions
3 Design Revisions
2 Design Revisions
1 Design Revision
(b) Design Revision storage examples spanning two XCF32P PROMs
PROM 0
REV 0
(32 Mbits)
REV 1
(32 Mbits)
PROM 1
ds123_20_102103
相關PDF資料
PDF描述
VI-24Y-CV CONVERTER MOD DC/DC 3.3V 99W
RMC07DREN-S13 CONN EDGECARD 14POS .100 EXTEND
VI-J2M-CY-B1 CONVERTER MOD DC/DC 10V 50W
XC18V01PCG20C IC PROM SERIAL CONFIG 1M 20-PLCC
VI-23Z-CV CONVERTER MOD DC/DC 2V 60W
相關代理商/技術參數
參數描述
XCF32PVOG48C0936 制造商:Xilinx 功能描述:XLXXCF32PVOG48C0936 PROM
XCF32PVOG48C4118 制造商:Xilinx 功能描述:
XCF3-81 制造商:SAIA - BURGESS ELECTRONICS INC. 功能描述:Catalogue / XCF3-81
XCF3-81-J1 制造商:SAIA - BURGESS ELECTRONICS INC. 功能描述:Catalogue / XCF3-81-J1
XCF3-81-J1Z1 制造商:SAIA - BURGESS ELECTRONICS INC. 功能描述:Catalogue / XCF3-81-J1Z1