參數資料
型號： XRT75VL00IVTR-F
廠商： Exar Corporation
文件頁數： 4/50頁
文件大?。?/td> 0K
描述： IC LIU E3/DS3/STS-1 1CH 52TQFP
標準包裝： 1,000
類型： 線路接口裝置（LIU）
驅動器/接收器數： 1/1
規程： DS3，E3，STS-1
電源電壓： 3.135 V ~ 3.465 V
安裝類型： 表面貼裝
封裝/外殼： 52-LQFP
供應商設備封裝： 52-TQFP（10x10）
包裝： 帶卷 (TR)
XRT75VL00
10
E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
REV. 1.0.6
30
RLOS
O
Receive Loss of Signal Output Indicator
This output pin toggles "High" if Receiver has detected a Loss of Signal Condi-
tion in the incoming line signal.
The criteria for declaring/clearing an LOS Condition depends upon whether it is
operating in the E3 or STS-1/DS3 Mode and is described in Section 2.04.
29
RLOL
O
Receive Loss of Lock Output Indicator:
This output pin toggles "High" if the XRT75VL00 has detected a Loss of Lock
Condition. LOL (Loss of Lock) condition is declared if the recovered clock fre-
quency deviates from the Reference Clock frequency (available at ExClk input
pin) by more than 0.5%.
33
Rext
****
External Bias control Resistor of 3.3 K
±1%.
Should be connected to RefAGND via 3.3 K
resistor.
15
TEST
I
Test Mode:
Connect this pin “High” to configure the XRT75VL00 in test mode.
NOTE: This pin is internally pulled Down.
16
ICT
I
In-Circuit Test Input:
Setting this pin "Low" causes all digital and analog outputs to go into a high-
impedance state to allow for in-circuit testing. For normal operation, set this pin
"High".
NOTE: This pin is internally pulled “High".
2
TAOS
I
Transmit All Ones Select
A “High" on this pin causes the Transmitter Section to generate and transmit a
continuous AMI all “1’s” pattern onto the line. The frequency of this “1’s” pattern
is determined by TxClk.
NOTES:
1.
This input pin is ignored if the XRT75VL00 is operating in the HOST
Mode and should be tied to GND.
2.
Analog Loopback and Remote Loopback have priority over request.
3.
This pin is internally pulled down.
28
LOSMUT/
INT
I/O
MUTE-upon-LOS Enable Input or Interrupt Ouput:
In Hardware Mode, setting this pin “High” configures the XRT75VL00 to Mute
the recovered data on the RPOS and RNEG whenever an LOS condition is
declared. RPOS and RNEG outputs are pulled “Low”.
NOTE:
If the XRT75VL00 is configured in HOST mode, this pin functions as
INT pin (please refer to the pin description for the Microprocessor
Interface).
CONTROL AND ALARM INTERFACE
相關PDF資料
PDF描述
VE-B5B-MX-B1 CONVERTER MOD DC/DC 95V 75W
XRT75VL00IVTR IC LIU E3/DS3/STS-1 1CH 52TQFP
IDT7207L35P IC FIFO 16384X18 35NS 28DIP
VI-BNF-MX-B1 CONVERTER MOD DC/DC 72V 75W
VE-BN1-MY CONVERTER MOD DC/DC 12V 50W
相關代理商/技術參數
參數描述
XRT79L71 制造商:EXAR 制造商全稱:EXAR 功能描述:1-CHANNEL DS3/E3 ATM UNI/PPP/CLEAR-CHANNEL FRAMER IC -
XRT79L71_07 制造商:EXAR 制造商全稱:EXAR 功能描述:1-CHANNEL DS3/E3 ATM UNI/PPP/CLEAR-CHANNEL FRAMER IC - HARDWARE
XRT79L71_1 制造商:EXAR 制造商全稱:EXAR 功能描述:1-CHANNEL DS3/E3 ATM UNI/PPP/CLEAR-CHANNEL FRAMER IC -
XRT79L71ES 功能描述:時鐘合成器/抖動清除器 1 CH DS3/E3 ATM /UNI/PPP COMBO RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
XRT79L71IB 功能描述:時鐘合成器/抖動清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*