參數資料
型號： XRT91L30
廠商： Exar Corporation
英文描述： STS-12/STM-4 OR STS-3/STM-1 SONET/SDH TRANSCEIVER
中文描述： STS-12/STM-4或STS-3/STM-1的SONET / SDH收發器
文件頁數： 29/40頁
文件大小： 387K
代理商： XRT91L30
xr
REV. P1.0.8
PRELIMINARY
STS-12/STM-4 OR STS-3/STM-1 SONET/SDH TRANSCEIVER
XRT91L30
27
3.7
Two types of loop timing are possible in the XRT91L30.
In the internal loop timing mode, loop timing is controlled by the LOOPTIME pin. This mode is selected by
asserting the LOOPTIME signal to a high level. When the loop timing mode is activated, the CMU synthesized
hi-speed reference clock input to the Retimer is replaced with the hi-speed internally recovered receive clock
coming from the CDR. Under this condition both the transmit and receive sections are synchronized to the
internally recovered receive clock. Loop time mode directly locks the Retimer to the recovered receive clock.
In external loop timing mode, the XRT91L30 allows the user the flexibility of using an externally recovered
receive clock for retiming the high speed serial data. First, the CDRDIS input pin should be set high. By doing
so, the internal CDR is disabled and bypassed and the XRT91L30 will sample the incoming high speed serial
data on RXIP/N with the externally recovered receive clock connected to the XRXCLKIP/N inputs. In this state,
the receive clock de-jittering and recovery is done externally and fed thru XRXCLKIP/N and the XRT91L30 will
sample RXIP/N on the rising edge of XRXCLKIP/N. Secondly, the LOOPTIME pin must also be set high in
order to select the externally recovered receive clock on XRXCLKIP/N as the reference clock source for the
transmit serial data output stream TXOP/N.
Table 15 provides configuration for selecting the loop timing and clock recovery modes. The use of the on-chip
CDR or an external recovered clock in loop timing applications is shown in Figure 16.
Loop Timing and Clock Control
T
ABLE
15: L
OOP
T
IMING
AND
C
LOCK
R
ECOVERY
CONFIGURATIONS
CDRDIS
LOOPTIME
T
RANSMIT
C
LOCK
S
OURCE
R
ECEIVE
C
LOCK
S
OURCE
0
0
Clock Multiplier Unit
CDR Enabled.
Clock and Data recovery by internal CDR
0
1
Internal CDR
CDR Enabled.
Clock and Data recovery by internal CDR
1
0
Clock Multiplier Unit
CDR Disabled.
Externally recovered Receive Clock from
XRXCLKIP/N
622.08/155.52 Mbps data on RXIP/N sampled at
rising edge of XRXCLKIP/N
1
1
External CDR thru XRXCLKIP/N
CDR Disabled.
Externally recovered Receive Clock from
XRXCLKIP/N
622.08/155.52 Mbps data on RXIP/N sampled at
rising edge of XRXCLKIP/N
相關PDF資料
PDF描述
XRT91L31 STS-12/STM-4 OR STS-3/STM-1 SONET/SDH TRANSCEIVER
XRT91L31IQ STS-12/STM-4 OR STS-3/STM-1 SONET/SDH TRANSCEIVER
XRT91L32 STS-12/STM-4 OR STS-3/STM-1 SONET/SDH TRANSCEIVER
XRT91L32IQ-F STS-12/STM-4 OR STS-3/STM-1 SONET/SDH TRANSCEIVER
XRT91L80 2.488/2.666 GBPS STS-48/STM-16 SONET/SDH TRANSCEIVER
相關代理商/技術參數
參數描述
XRT91L30_0611 制造商:EXAR 制造商全稱:EXAR 功能描述:STS-12/STM-4 OR STS-3/STM-1 SONET/SDH TRANSCEIVER
XRT91L30_10 制造商:EXAR 制造商全稱:EXAR 功能描述:STS12-STM4 OR STS3-STM1 SONET-SDH Transceiver
XRT91L306 制造商:EXAR 制造商全稱:EXAR 功能描述:STS-12/STM-4 OR STS-3/STM-1 SONET/SDH TRANSCEIVER
XRT91L30ES 功能描述:總線收發器 RoHS:否 制造商:Fairchild Semiconductor 邏輯類型:CMOS 邏輯系列:74VCX 每芯片的通道數量:16 輸入電平:CMOS 輸出電平:CMOS 輸出類型:3-State 高電平輸出電流:- 24 mA 低電平輸出電流:24 mA 傳播延遲時間:6.2 ns 電源電壓-最大:2.7 V, 3.6 V 電源電壓-最小:1.65 V, 2.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-48 封裝:Reel
XRT91L30IQ 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*