參數資料
型號： Z86C83
廠商： ZiLOG, Inc.
英文描述： CMOS Z8 Microcontroller(CMOS Z8系列微控制器)
中文描述： 微控制器的CMOS Z8的CMOS（Z8系列微控制器）
文件頁數： 43/52頁
文件大?。?/td> 338K
代理商： Z86C83
Z86C83/C84/E83
CMOS Z8
MCU
Zilog
DS97DZ80700
P R E L I M I N A R Y
8-43
1
WDT Time Select (D1, D0).
Selects the WDT time-out pe-
riod. It is configured as shown in Table 15.
WDT During HALT (D2).
This bit determines whether or
not the WDT is active during HALT Mode. A "1" indicates
active during HALT. The default is "1".
Note:
If WDT is permanently selected (always ON mode),
the WDT will continue to run even if set not to run in STOP
or HALT Mode.
WDT During STOP (D3).
This bit determines whether or
not the WDT is active during STOP Mode. Since XTAL
clock is stopped during STOP Mode, unless as specified
below, the on-board RC has to be selected as the clock
source to the POR counter. A "1" indicates active during
STOP. The default is "1". If bits D3 and D4 are both set to
"1", the WDT only, is driven by the external clock during
STOP Mode.
Notes:
1.
If WDT is permanently selected (always ON mode)
using internal on-board RC oscillator, the WDT will
continue to run even if set not to run in STOP or HALT
Mode.
2.
WDT instructions affect the Z (Zero), S (Sign), and V
(Overflow) flags.
On-Board, Power-On-Reset RC or External XTAL1
Oscillator Select (D4).
This bit determines which oscilla-
tor source is used to clock the internal POR and WDT
counter chain. If the bit is a "1", the internal RC oscillator is
bypassed and the POR and WDT clock source is driven
from the external pin, XTAL1. The default configuration of
this bit is 0, which selects the RC oscillator. If the XTAL1
pin is selected as the oscillator source for the WDT, during
STOP Mode, the oscillator will be stopped and the WDT
will not run. This is true even if the WDT is selected to run
during STOP Mode.
V
CC
Voltage Comparator.
An on-board Voltage Compar-
ator checks that V
CC
is at the required level to ensure cor-
rect operation of the device. RESET is globally driven if
V
CC
is below the specified voltage (typically 2.6V).
ROM Protect.
ROM Protect is mask or OTP bit-program-
mable. It is selected by the customer at the time the ROM
code is submitted.
ROM Mask Selectable Options
There are two ROM mask options that must be selected at
the time the ROM mask is ordered (ROM code submitted)
for the Z86C83/C84 and three Z86E83 OTP bit options.
Figure 39. Watch-Dog Timer Mode Register
(Write Only)
Table 15. WDT Time Select (Min. @ 5.0V)
D1
0
0
1
1
Note:
The minimum time shown is for V
CC
@ 5.0V.
D0
0
1
0
1
Time-Out of
Internal RC OSC
6.25 ms min
12.5 ms min
25 ms min
100 ms min
Time-Out of
SCLK Clock
256 SCLK
512 SCLK
1024 SCLK
4096 SCLK
D7
D6
D5
D4
D3
D2
D1
D0
WDTMR (F) 0F
WDT TAP
00 256 SCLK
01 512 SCLK
10 1024 SCLK
11 4096 SCLK
WDT During HALT
0 OFF
1 ON
*
WDT During STOP
0 OFF
1 ON
*
XTAL1/INT RC Select for WDT
0 On-Board RC
1 XTAL
Reserved (Must be 0)
*
Default setting after RESET
XTAL=SCLK/TCLK shown
*
Table 16. Selectable Options
Option
Permanent WDT
ROM Protect
EPROM/TEST Mode Disable*
Note:
*For Z86E83 only
EPROM/TEST Mode Disable - On the Z86E83, the user can per-
manently disable entry into EPROM Mode and TEST Mode
by programming this bit.
Selection
Yes/No
Yes/No
Yes/No
相關PDF資料
PDF描述
Z86E83 CMOS Z8 Microcontroller(CMOS Z8系列微控制器)
Z86C9620PSC CMOS Z8 MICROCONTROLLER
Z86C61 CMOS Z8 MICROCONTROLLER
Z86C6116VSC CMOS Z8 MICROCONTROLLER
Z86C6216VSC CMOS Z8 MICROCONTROLLER
相關代理商/技術參數
參數描述
Z86C8316PEC 制造商:ZILOG 制造商全稱:ZILOG 功能描述:Z8 MCU MICROCONTROLLERS
Z86C8316PSC 制造商:ZILOG 制造商全稱:ZILOG 功能描述:Z8 MCU MICROCONTROLLERS
Z86C8316SEC 制造商:ZILOG 制造商全稱:ZILOG 功能描述:Z8 MCU MICROCONTROLLERS
Z86C8316SSC 制造商:ZILOG 制造商全稱:ZILOG 功能描述:Z8 MCU MICROCONTROLLERS
Z86C8316VEC 制造商:ZILOG 制造商全稱:ZILOG 功能描述:Z8 MCU MICROCONTROLLERS
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*