The following sample programs can be found in the SAMP" />
參數資料
型號： 20-101-0494
廠商： Rabbit Semiconductor
文件頁數： 10/90頁
文件大?。?/td> 0K
描述： MODULE RABBITCORE RCM2250
標準包裝： 1
系列： RabbitCore®
模塊/板類型： MPU 核心模塊
適用于相關產品： RCM2250
產品目錄頁面： 620 (CN2011-ZH PDF)
其它名稱： 316-1092
12
RabbitCore RCM2200
3.1.1 Getting to Know the RCM2200
The following sample programs can be found in the SAMPLES\RCM2200 folder.
EXTSRAM.C
—demonstrates the setup and simple addressing to an external SRAM.
This program first maps the external SRAM to the I/O Bank 7 register with a maximum
of 15 wait states, chip select strobe (PE7), and allows writes. The first 256 bytes of
SRAM are cleared and read back. Values are then written to the same area and are read
back. The Dynamic C STDIO window will indicate if writes and reads did not occur
Connect an external SRAM as shown below before you run this sample program.
FLASHLED.C
—repeatedly flashes LED DS3 on the Prototyping Board on and off.
LED DS3 is controlled by Parallel Port E bit 7 (PE7). LED DS2 will remain on
continuously.
FLASHLEDS.C
—demonstrates the use of coding with assembly instructions, cofunc-
tions, and costatements to flash LEDs DS2 and DS3 on the Prototyping Board on and
off. LEDs DS2 and DS3 are controlled by Parallel Port E bit 1 (PE1) and Parallel Port E
bit 7 (PE7).Once you have compiled this program and it is running, LEDs DS2 and
DS3 will flash on/off at different rates.
TOGGLELED.C
—demonstrates the use of costatements to detect switch presses using
the press-and-release method of debouncing. As soon as the sample program starts run-
ning, LED DS2 on the Prototyping Board (which is controlled by PE1) starts flashing
once per second. Press switch S3 on the Prototyping Board (which is connected to PB3)
to toggle LED DS3 on the Prototyping Board (which is controlled by PE7) on and off.
The pushbutton switch is debounced by the software.
RCM2300
Core Module
SRAM
D0D7
PE7
/IORD
/IOWR
A0A3
D0D7
/WE
/OE
/CE
10 kW
Vcc
A0A3
相關PDF資料
PDF描述
AT25020N-10SI-2.7 IC EEPROM 2KBIT 2.1MHZ 8SOIC
345-030-521-801 CARDEDGE 30POS DUAL .100 GREEN
12FMN-BMTTN-A-TF CONN FMN HSNG 12POS STAG NOR SMD
AT25020-10PI-2.7 IC EEPROM 2KBIT 2.1MHZ 8DIP
345-030-521-204 CARDEDGE 30POS DUAL .100 GREEN
相關代理商/技術參數
參數描述
20-101-0495 功能描述:處理器配件 BASEPLATE RoHS:否 制造商:Olimex Ltd. 產品:Cable 用于:
20-101-0497 功能描述:單板計算機 OP6810 RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
201-01050 功能描述:鋁質電解電容器 - 帶引線 1 uF Electrolytic Capacitor RoHS:否 制造商:Kemet 引線類型: 電容:220 uF 容差:20 % 電壓額定值:25 V 工作溫度范圍: 端接類型:Radial 外殼直徑:8 mm 外殼長度:11 mm 引線間隔:5 mm 產品:General Purpose Electrolytic Capacitors 封裝:Bulk
201-0105-01 功能描述:印刷電路板和試驗板 JTAG 20 Pin Connector RoHS:否 制造商:3M Electronic Solutions Division 產品:Jumper & Insulated Wires 描述/功能:Jumper wire, 22 AWG 0.1 inch 長度:0.1 in 寬度:
20-101-0502 功能描述:處理器配件 Keypad/Display Unit 5V Panle Mount RoHS:否 制造商:Olimex Ltd. 產品:Cable 用于:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*