參數資料
型號： 5962-0050401QXC
廠商： ATMEL CORP
元件分類： ADC
英文描述： 1-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CQFP68
封裝： HEAT SPREADER, CERAMIC, QFP-68
文件頁數： 22/57頁
文件大?。?/td> 1276K
代理商： 5962-0050401QXC
29
TS8388B
2144C–BDC–04/03
Data Ready Output
Signal Restart
The Data Ready output signal restarts on DRRB command rising edge, ECL logical high levels
(-0.8V). DRRB may also be Grounded, or is allowed to float, for normal free running Data
Ready output signal.
The Data Ready signal restart sequence depends on the logical level of the external encoding
clock, at DRRB rising edge instant:
The DRRB rising edge occurs when external encoding clock input (CLK, CLKB) is LOW:
The Data Ready output first rising edge occurs after half a clock period on the clock falling
edge, after a delay time TDR = 1320 ps already defined hereabove.
The DRRB rising edge occurs when external encoding clock input (CLK, CLKB) is HIGH:
The Data Ready output first rising edge occurs after one clock period on the clock falling
edge, and a delay TDR = 1320 ps.
Consequently, as the analog input is sampled on clock rising edge, the first digitized data cor-
responding to the first acquisition (N) after Data Ready signal restart (rising edge) is always
strobed by the third rising edge of the data ready signal.
The time delay (TD1) is specified between the last point of a change in the differential output
data (zero crossing point) to the rising or falling edge of the differential Data Ready signal (DR,
DRB) (zero crossing point).
For normal initialization of Data Ready output signal, the external encoding clock signal fre-
quency and level must be controlled. It is reminded that the minimum encoding clock sampling
rate for the ADC is 10 MSPS and consequently the clock cannot be stopped.
One single pin is used for both DRRB input command and die junction temperature monitor-
ing. Pin denomination will be DRRB/DIOD. On the former version denomination was DIOD.
Temperature monitoring and Data Ready control by DRRB is not possible simultaneously.
Analog Inputs (V
IN)
(V
INB)
The analog input Full Scale range is 0.5V peak to peak (Vpp), or -2 dBm into the 50
termina-
tion resistor.
In differential mode input configuration, that means 0.25V on each input, or ±125 mV around
0V. The input common mode is GROUND.
The typical input capacitance is 3 pF for TS8388B in CQFP and CBGA packages.
The input capacitance is mainly due to the package. The ESD protections are not connected
(but present) on the inputs.
Differential Inputs
Voltage Span
Figure 29. Differential Inputs Voltage Span
-125
125
[mV]
-250 mV
VIN
(VIN, VINB) =
±250 mV = 500 mV diff
500 mV
Full Scale
analog input
t
VINB
0V
250 mV
相關PDF資料
PDF描述
5962-0051101NXD 1-CH 14-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PQFP48
THS1401CPFB 1-CH 14-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PQFP48
THS1403CPFB 1-CH 14-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PQFP48
THS1408CPFB 1-CH 14-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PQFP48
THS1408QPHP 1-CH 14-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PQFP48
相關代理商/技術參數
參數描述
5962-0050601Q2A 制造商:TI 制造商全稱:Texas Instruments 功能描述:QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
5962-0050601QEA 制造商:TI 制造商全稱:Texas Instruments 功能描述:QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
5962-0050601QFA 制造商:Texas Instruments 功能描述:
5962005066345 制造商:Texas Instruments 功能描述:
5962005066346 制造商:Texas Instruments 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*