參數資料
型號: A42MX16-1TQ100
廠商: Electronic Theatre Controls, Inc.
英文描述: XFRMR PWR 10.0VCT 8.0A QC .187
中文描述: 40MX和42MX FPGA系列
文件頁數: 111/120頁
文件大?。?/td> 854K
代理商: A42MX16-1TQ100
90
4958B–AUTO–11/10
Atmel ATA6285/ATA6286 [Preliminary]
3.13.5.11
Timer2 Compare Register – T2COR
The Compare Registers contain a 16-bit value that is continuously compared with the counter
value (T2CNT). A counter match can be used to generate a Compare interrupt, a counter reset,
an output clock CLK
T2 or to generate a waveform with the modulator on the output pins (T2O1,
T2O2).
The Compare Registers is a 16-bit register. To ensure that both the high and low bytes are writ-
ten simultaneously when the CPU writes to these registers, the access is performed using an
8-bit temporary High Byte Register (TEMP). This temporary register is shared by all 16-bit regis-
3.13.5.12
Timer2 Interrupt Flag Register – T2IFR
Bits 7..6 - Res: Reserved Bits
These bits are reserved bits at the ATA6289 and will always read as zero.
Bit 5 - T2TCF: Timer2 SSI Transmit Complete Flag Bit
This flag bit is set when the entire frame in the SSI Shift Register has been shifted out and there
are no new data currently present in the transmit buffer (T2MDR). The T2TCF flag bit is auto-
matically cleared when a transmit complete interrupt is executed, or it can be cleared by writing
a one to its bit location. The T2TCF flag can generate a Transmit Complete interrupt (see
Bit 4 - T2TXF: Timer2 SSI Transmit Flag Bit
The T2TXF flag indicates if the transmit buffer (T2MDR) is ready to receive new data. If T2TXF
is one, the buffer is empty, and therefore ready to be written. The T2TXF flag can generate a
Data Register Empty interrupt (see description of the T2TXIM bit in Section 3.13.5.13 “Timer2
T2TXF is set after a reset to indicate that the SSI Transmitter is ready.
Bit 3 - T2RXF: Timer2 SSI Receive Flag Bit
This flag bit is set when there are unread data in the receive buffer and cleared when the receive
buffer is empty (i.e., does not contain any unread data). If the Timer2 SSI is disabled (T2SSIE =
“0” in the T2MRB register), the receive buffer will be cleared and consequently the T2RXF bit will
become zero. The T2RXF flag can be used to generate a Receive Complete interrupt (see
Bit
7654
3210
T2CORH [15..8]
T2CORH
T2CORL [7..0]
T2CORL
Read/Write
R/W
Initial Value
0000
Bit
76
543
210
-
T2TCF
T2TXF
T2RXF
T2ICF
T2COF
T2OFF
T2IFR
Read/Write
R
R/W
Initial Value
00
010
000
相關PDF資料
PDF描述
A42MX24-1TQ100 40MX and 42MX FPGA Families
A42MX02-1TQ100A 40MX and 42MX FPGA Families
A42MX04-1TQ100A 40MX and 42MX FPGA Families
A42MX09-1TQ100A Power Transformer; Series:VPS; Power Rating:43VA; Mounting Type:Chassis; Current Rating:3.4 Series/6.8 Prllel A; External Depth:2.000"; External Height:2.688"; External Width:3.125"; Leaded Process Compatible:No
A42MX16-1TQ100A 40MX and 42MX FPGA Families
相關代理商/技術參數
參數描述
A42MX16-1TQ100A 制造商:未知廠家 制造商全稱:未知廠家 功能描述:40MX and 42MX FPGA Families
A42MX16-1TQ100B 制造商:未知廠家 制造商全稱:未知廠家 功能描述:40MX and 42MX FPGA Families
A42MX16-1TQ100ES 制造商:未知廠家 制造商全稱:未知廠家 功能描述:40MX and 42MX FPGA Families
A42MX16-1TQ100I 制造商:未知廠家 制造商全稱:未知廠家 功能描述:40MX and 42MX FPGA Families
A42MX16-1TQ100M 制造商:未知廠家 制造商全稱:未知廠家 功能描述:40MX and 42MX FPGA Families